 parts needed! front pan frame rack question, getting ready to rack my car and need some parts |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| crash914 |
 Nov 17 2014, 07:54 PM
Post
#1
|
|
its a mystery to me  Group: Members Posts: 1,826 Joined: 17-March 03 From: Marriottsville, MD Member No.: 434 Region Association: MidAtlantic Region  |
all-- I had the frame guy over this evening to look at my car. He has a celette bench and all the fixtures and tooling for early 911's. Is the front pan and all pick up points the same? I am thinking if all the 5 lug rack and struts bolt in that we can use the same fixtures.
We will make up some fixtures for the rear suspension console. Without digging up Andy's thread, any special watch out fors? I will need to replace some of the internal corner bracing under the headlight buckets so we can get down to the pan. All new parts are available for this? I guess I will have to document this in pictures for others....thanks |
   |
 
|
  |
Replies(1 - 6)
| scotty b |
Nov 17 2014, 08:12 PM
Post
#2
|
|
rust free you say ? Group: Members Posts: 16,375 Joined: 7-January 05 From: richmond, Va. Member No.: 3,419 Region Association: None |
front end mounting is all the same
|
|
|
|
| crash914 |
Nov 18 2014, 03:59 AM
Post
#3
|
|
its a mystery to me Group: Members Posts: 1,826 Joined: 17-March 03 From: Marriottsville, MD Member No.: 434 Region Association: MidAtlantic Region |
Thanks, I thought so. it looks like the fixturing will be simple...just have to fab the rear pick up points.
Right now it is pull out the engine and all during Turkey day and get it on the rack for a couple of weekends..should be good or better than new! I think that there is some body twist from a previous owner and rear quarter hit. THis car has been a track car for around 20 years.. |
|
|
|
| crash914 |
Nov 18 2014, 11:34 AM
Post
#4
|
|
its a mystery to me Group: Members Posts: 1,826 Joined: 17-March 03 From: Marriottsville, MD Member No.: 434 Region Association: MidAtlantic Region |
I now need to find the 2 pieces that Restoration Design doesn't have. Anyone have a sawzall catalog handy?
914502110101283524019.pdf ( 156.95k )
Number of downloads: 64 |
|
|
|
| 1845 |
Nov 18 2014, 11:54 AM
Post
#5
|
|
Newbie Group: Members Posts: 27 Joined: 30-July 03 From: Gambrills, MD Member No.: 966 Region Association: MidAtlantic Region |
This is on my list in the future as well. I have a good driver, but had a front end hit in the past and before a full on restoration, I am going to put it on a the bench as well.
I live in Maryland and assumed I would take it to EuroPro, what to share who is doing the work? |
|
|
|
| rick 918-S |
Nov 18 2014, 12:12 PM
Post
#6
|
|
Hey nice rack! -Celette Group: Members Posts: 20,504 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region 
|
I thought restoration design made part #9
|
 |
|
| crash914 |
Nov 18 2014, 01:30 PM
Post
#7
|
|
its a mystery to me Group: Members Posts: 1,826 Joined: 17-March 03 From: Marriottsville, MD Member No.: 434 Region Association: MidAtlantic Region |
I am getting #9 from restoration design. they don't have the rest of them.
EuroPro is going to do the work...thanks, |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 01:51 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.