![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
kahunafamily5 |
![]()
Post
#1
|
Newbie ![]() Group: Members Posts: 3 Joined: 28-May 15 From: Celina, TX Member No.: 18,771 Region Association: None ![]() |
Am told by my shop that my first gear is gone on my newly acquired 75 1.8L. Question...what should I expect to have 1st gear replaced? And, how hard is the job should I try and attempt it myself?
Paul |
![]() ![]() |
BeatNavy |
![]()
Post
#2
|
Certified Professional Scapegoat ![]() ![]() ![]() ![]() Group: Members Posts: 2,954 Joined: 26-February 14 From: Easton, MD Member No.: 17,042 Region Association: MidAtlantic Region ![]() ![]() |
Worth reading through this: 1st Gear Replacement on 901 Transmission
It can be done without removing the transmission or engine. |
VaccaRabite |
![]()
Post
#3
|
En Garde! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 13,757 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region ![]() ![]() |
Do you have experience with transmissions?
If not, have someone who does do the work. Zach |
kahunafamily5 |
![]()
Post
#4
|
Newbie ![]() Group: Members Posts: 3 Joined: 28-May 15 From: Celina, TX Member No.: 18,771 Region Association: None ![]() |
I do not have any experience with transmissions. I'm being told he can get it done for about $1000-$1100.
|
ndfrigi |
![]()
Post
#5
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,967 Joined: 21-August 11 From: Orange County Member No.: 13,474 Region Association: Southern California ![]() ![]() |
that is too much quote. contact Dr. Evil.
|
r_towle |
![]()
Post
#6
|
Custom Member ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States ![]() ![]() |
Has he checked your clutch cable tension, clutch tube, and clutch release fork?
|
kahunafamily5 |
![]()
Post
#7
|
Newbie ![]() Group: Members Posts: 3 Joined: 28-May 15 From: Celina, TX Member No.: 18,771 Region Association: None ![]() |
Just installed a brand new clutch. I bought the car not running knowing the clutch was bad. After the clutch was installed, upon test driving found 1st gear was gone.
|
76-914 |
![]()
Post
#8
|
Repeat Offender & Resident Subaru Antagonist ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 13,737 Joined: 23-January 09 From: Temecula, CA Member No.: 9,964 Region Association: Southern California ![]() ![]() |
Check out that link that Rich gave you. It's not that difficult and can be done with a minimum set of hand tools. If you get tripped up take pics and post 'em here. It's what were famous for. There are a few members in the DFW area that would be willing to help as well. Well, I'm pretty sure they would offer. (IMG:style_emoticons/default/smile.gif) For $50 you can order Dr Evil's complete step by step video detailing the disassembly and assembly of the 901 transmission.
|
Geezer914 |
![]()
Post
#9
|
Geezer914 ![]() ![]() ![]() ![]() Group: Members Posts: 2,010 Joined: 18-March 09 From: Salem, NJ Member No.: 10,179 Region Association: North East States ![]() ![]() |
Start looking for a good used 1st gear slider for $75 to $100. $1000-$1100, is high, but a new slider goes for $500 plus $60 for a gallon of Swepco gear oil.
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 11th July 2025 - 03:51 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |