 Rear brakes, 5 lug, Help! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| N_Jay |
 Sep 10 2016, 12:55 PM
Post
#1
|
|
Member  Group: Members Posts: 283 Joined: 2-March 16 From: Chicago NW Burbs Member No.: 19,720 Region Association: None  |
Years ago I did a five lug conversion using 911S (I am thinking early 70's) calipers and rotors.
Of course I lost my parking brake. Well,. I would really like the parking brake back, and don't want to go as far as building a set of trailing arms with mounts for 911 parking brake parts. So, . . . . What are my options?? I don't mind losing vented rotors since I am not racing. Are there 5 lug non vented rotors that will fit 914 calipers? Are there other calipers that will fit vented or non-vented 911 rear rotors that have a mechanical parking brake? Maybe VW or Audi parts, even though they usually have floating calipers. Thoughts???? |
   |
 
|
  |
Replies(1 - 6)
| mepstein |
Sep 10 2016, 01:18 PM
Post
#2
|
|
914-6 GT in waiting Group: Members Posts: 19,307 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region 
|
Call Mark at 914rubber.com He has 914-6 reproduction calipers for vented or non vented rotors. So you will have a stock parking brake solution.
|
 |
|
| Mikey914 |
Sep 10 2016, 01:19 PM
Post
#3
|
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None
|
Yep doing more up now you can PM me if you wish. I have a small waiting list.
Mark |
|
|
|
| Krieger |
Sep 10 2016, 01:24 PM
Post
#4
|
|
Advanced Member Group: Members Posts: 4,723 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None
|
914/6 rear rotors are solid and 5 lug. I'm not sure, but stock 914 rear calipers should work with them. Stock 914/4 rear calipers and rotors with the rotors drilled for 5 lug?
|
|
|
|
| N_Jay |
Sep 11 2016, 10:37 AM
Post
#5
|
|
Member Group: Members Posts: 283 Joined: 2-March 16 From: Chicago NW Burbs Member No.: 19,720 Region Association: None |
Does anyone have the measurements on the 914-6 rear rotors?
Are they the same as 914-4? What is the differences between the calipers? (I always thought they were vented, but seem to be mistaken.) If I go back to 914-4 calipers, I guess I can get the rotors drilled for five lugs? |
|
|
|
| mepstein |
Sep 11 2016, 10:58 AM
Post
#6
|
|
914-6 GT in waiting Group: Members Posts: 19,307 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region
|
Does anyone have the measurements on the 914-6 rear rotors?
Are they the same as 914-4? No, they are 5 lug and measure slightly different. What is the differences between the calipers? (I always thought they were vented, but seem to be mistaken.) larger calipers, larger pistons. 914-6 GT calipers are vented. If I go back to 914-4 calipers, I guess I can get the rotors drilled for five lugs? Yes but then you may be mismatched on the balance between front and rear calipers. Edit - Mark has vented or non vented 914-6 calipers. Just bolt on, add cables and parking brake lever and go. I would buy them now. Once they are gone, a set of real calipers will cost you double. |
|
|
|
| sixnotfour |
Sep 11 2016, 11:14 AM
Post
#7
|
|
914 Wizard Group: Members Posts: 10,433 Joined: 12-September 04 From: Life Elevated..planet UT. Member No.: 2,744 Region Association: Rocky Mountains 
|
just get some 5 hole redrilled -4 rotors. or keep your vented rotors and buy the 914rubber steel -6 calipers.better because braking remins balanced..
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 05:02 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.