![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
sixaddict |
![]()
Post
#1
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 807 Joined: 22-January 09 From: Panama City Beach, FL Member No.: 9,961 Region Association: South East States ![]() ![]() |
I have a few questions on part shown in pic
1. Is this part the same for both -4 and -6 ( this one is from a 6 as FYI) 2. The lower side has bushing/bearing held in by 2 snap rings......Can it be removed without damage 3. I believe I have spare top bushing ...but paid big through PCNA are there optional sources. Please answer if you actually have knowledge versus opinion, as I am trying to prevent major error ( on my part) Thanks ![]() ![]() |
![]() ![]() |
rgalla9146 |
![]()
Post
#2
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,570 Joined: 23-November 05 From: Paramus NJ Member No.: 5,176 Region Association: None ![]() ![]() |
I have a few questions on part shown in pic 1. Is this part the same for both -4 and -6 ( this one is from a 6 as FYI) 2. The lower side has bushing/bearing held in by 2 snap rings......Can it be removed without damage 3. I believe I have spare top bushing ...but paid big through PCNA are there optional sources. Please answer if you actually have knowledge versus opinion, as I am trying to prevent major error ( on my part) Thanks That part is only for a 6, it is not for a 4 |
sixaddict |
![]()
Post
#3
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 807 Joined: 22-January 09 From: Panama City Beach, FL Member No.: 9,961 Region Association: South East States ![]() ![]() |
Thanks
So I suspect that means the bearings are exclusively six....meaning add $$$$ -right? I have a few questions on part shown in pic 1. Is this part the same for both -4 and -6 ( this one is from a 6 as FYI) 2. The lower side has bushing/bearing held in by 2 snap rings......Can it be removed without damage 3. I believe I have spare top bushing ...but paid big through PCNA are there optional sources. Please answer if you actually have knowledge versus opinion, as I am trying to prevent major error ( on my part) Thanks That part is only for a 6, it is not for a 4 |
sixaddict |
![]()
Post
#4
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 807 Joined: 22-January 09 From: Panama City Beach, FL Member No.: 9,961 Region Association: South East States ![]() ![]() |
bump
|
rgalla9146 |
![]()
Post
#5
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,570 Joined: 23-November 05 From: Paramus NJ Member No.: 5,176 Region Association: None ![]() ![]() |
Please visit recent thread that discusses conversion to 'left hand ignition'
There is info there on bearings and much more. |
914Sixer |
![]()
Post
#6
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,909 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region ![]() ![]() |
Top bearing is exclusive to the six (same as the 911 bearing of the time). Lower bearing is standard 4 bearing.
|
sixaddict |
![]()
Post
#7
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 807 Joined: 22-January 09 From: Panama City Beach, FL Member No.: 9,961 Region Association: South East States ![]() ![]() |
Mark /rgalla
Thanks good info. Mark you really hit the "mark" .....very helpful. In fact my local 914 guru (shop) couldn't give me the answer you did. Trying to remove so I can have the cad finish restored. One more question of you....for a -4 is the top bearing available without a ransom. Its for another car so have two things working and did not want to confuse issue. Thanks again. Terry P.S. Got the seals |
mepstein |
![]()
Post
#8
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,324 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
If it's this one - 900.052.031.00 - it's a $10 bearing.
|
914Sixer |
![]()
Post
#9
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,909 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region ![]() ![]() |
The best price I found for stock -4 bearings was a seller on Ebay that had the pair for around $56 shipped. Lower was around $20 by itself shipped. Be VERY CAREFUL with the top -6 bearing, they are in the $260 range new.
|
sixaddict |
![]()
Post
#10
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 807 Joined: 22-January 09 From: Panama City Beach, FL Member No.: 9,961 Region Association: South East States ![]() ![]() |
Yes I thought it was heavy $$$ and mine came of in pieces. Not sure if I did that ( it had fair amount of play) or not but result is the same ---Ka Ching !
The best price I found for stock -4 bearings was a seller on Ebay that had the pair for around $56 shipped. Lower was around $20 by itself shipped. Be VERY CAREFUL with the top -6 bearing, they are in the $260 range new. |
Cracker |
![]()
Post
#11
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,148 Joined: 2-February 10 From: Atlanta (area) Member No.: 11,316 Region Association: South East States ![]() ![]() |
...don't "lose" that entire upper steering shaft and definitely don't leave it in the trunk! (IMG:style_emoticons/default/poke.gif)
T |
sixaddict |
![]()
Post
#12
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 807 Joined: 22-January 09 From: Panama City Beach, FL Member No.: 9,961 Region Association: South East States ![]() ![]() |
leave it to your friends....not to worry it is for white car (IMG:style_emoticons/default/dry.gif)
|
Harpo |
![]()
Post
#13
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,304 Joined: 21-August 11 From: Motor City aka Detroit Member No.: 13,469 Region Association: None ![]() |
|
McMark |
![]()
Post
#14
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 20,179 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None ![]() |
$11 + actual shipping, drop shipped to you.
|
mepstein |
![]()
Post
#15
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,324 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
If you have a local Porsche dealer, ask them. They usually don't charge for shipping. It's only a couple dollars from our distributer. I doubled the price to estimate retail.
Here's amazon and eBay Attached thumbnail(s) ![]() ![]() |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 16th June 2024 - 11:22 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |