Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Today at Sklines Garage, Things got done
skline
post May 21 2005, 01:37 AM
Post #1


Born to Drive
*****

Group: Members
Posts: 7,910
Joined: 26-December 02
From: Costa Mesa, CA
Member No.: 17
Region Association: Southern California
I worked alone today, kind of unusual. It got to be around 6 and I thought I still had plenty of daylight left and the car needed some things done to it. I needed to rebuild the water pump and seal up the Fuel pump block off plate which has leaked since I put the engine in. So I lifted up the passenger side rear and removed the water pump and took it into the garage. Bought a new impeller from my local supply house where I get a shops discount now since they all know me by name and I have spent so much money with them. Took it apart and put the new impeller on and then went to put it back in the car. Got it almost in and Slits and Toast show up. We chat for a bit while waiting for TonyAKAVW to show up. It starts getting dark so I jump back on the car to put it back together. I had to pull out the lights to see but got it all back in and hooked up and then fixed the block off plate and sealed it up. Started the car in the dark and noticed a very minor leak from one of the hoses. I will fix it in the morning. Still need to pull the tranny and install the new one with the H gear in it. I may or may not get to it tomorrow. I think I may try to drive it over to Joe's tomorrow to see how it handles on the freeway. That is if the tranny in there will hold up. We will just have to see how it goes tomorrow. Anyone want to come help me swap out the tranny in the morning? With 2 people I think we can do it in about an hour or so. (IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
 Reply to this topicStart new topic
Replies(1 - 12)
Grimstead
post May 21 2005, 02:22 AM
Post #2


Cheaky Monkey
***

Group: Members
Posts: 835
Joined: 20-March 05
From: Corona, Ca
Member No.: 3,789
Region Association: Southern California
What Time? I should be free in the afternoon. Maybe even drag Aaron with me.

PS, Just saw Kingdom of Heaven. Not a bad movie...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
DrifterJay
post May 21 2005, 05:12 AM
Post #3


I break stuff...
***

Group: Members
Posts: 1,034
Joined: 25-May 03
From: Oceanside, California
Member No.: 737
Region Association: None
very good movie indeed....when I was there we did your tranny in 45 min...that was including cutting off the exhaust...lol...and the custom paint work on it.... (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
maf914
post May 21 2005, 07:07 AM
Post #4


Not a Guru!
****

Group: Members
Posts: 3,049
Joined: 30-April 03
From: Central Florida
Member No.: 632
Region Association: None
QUOTE (Grimstead @ May 21 2005, 12:22 AM)
PS, Just saw Kingdom of Heaven. Not a bad movie...

The movie critics panned it. But what do they know? (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) I'd like to see it though. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
skline
post May 21 2005, 09:18 AM
Post #5


Born to Drive
*****

Group: Members
Posts: 7,910
Joined: 26-December 02
From: Costa Mesa, CA
Member No.: 17
Region Association: Southern California
Well, I have to be at Joe's house by 3 today for a little get together to celebrate his birthday. It is just a small family and friends thing. I was hoping if I were to go for it, I would do it this morning sometime.

Kingdom of Heaven? I have not even heard of that one. I will have to look that up.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SLITS
post May 21 2005, 09:26 AM
Post #6


"This Utah shit is HARSH!"
**********

Group: Benefactors
Posts: 13,602
Joined: 22-February 04
From: SoCal Mountains ...
Member No.: 1,696
Region Association: None
QUOTE (DrifterJay @ May 21 2005, 04:12 AM)
very good movie indeed....when I was there we did your tranny in 45 min...that was including cutting off the exhaust...lol...and the custom paint work on it.... (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)

Hey.....Tony delivered another 1.8 for you to turn into small aluminum & cast iron pieces when you return (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Grimstead
post May 21 2005, 03:55 PM
Post #7


Cheaky Monkey
***

Group: Members
Posts: 835
Joined: 20-March 05
From: Corona, Ca
Member No.: 3,789
Region Association: Southern California
Hi Scott,
Just got back, looks like I missed you. If you arn't finished, how about tomorrow?

Bill
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Rusty
post May 21 2005, 04:14 PM
Post #8


Wanted: Engine case GA003709
*****

Group: Admin
Posts: 7,959
Joined: 24-December 02
From: North Alabama
Member No.: 6
Region Association: Galt's Gulch
Sounds like a productive day. (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)

It was beautiful today here in Kansas.

I worked on the car a bit... yanked the backpad so I could reseal the rear window. Discovered that I need to repair the clips on the backpad. Gonna try some epoxy tomorrow to fix the clips. (IMG:http://www.914world.com/bbs2/html/emoticons/blink.gif) The window went in okay. Not great, but okay. I hate working with that butyl crap.

Also installed the new front Koni sport to replace the one that exploded... and got it packed up to send back for warranty. (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)

Oh, and I picked up my summer college textbooks. (IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif)

-Rusty (IMG:http://www.914world.com/bbs2/html/emoticons/smoke.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Elliot_Cannon
post May 21 2005, 08:21 PM
Post #9


Senior Member
***

Group: Retired Members
Posts: 1,922
Joined: 26-March 03
From: Orange County Ca
Member No.: 480
Region Association: None
I had a wonderful day today in traffic school. If it didn't take the point for speeding off my record it would have been a total waist of time. I might be able to come over and help tomorrow. What would be a good time?
Cheers, Elliot
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post May 21 2005, 10:58 PM
Post #10


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
i came over and did nothing. along with alberto.

then we went over to Joe Buckles....and did nothing but eat and hang out.



AHHhhhh.... the life.


and we made fun of 'old man scott' (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)

jk Skline (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
skline
post May 21 2005, 10:58 PM
Post #11


Born to Drive
*****

Group: Members
Posts: 7,910
Joined: 26-December 02
From: Costa Mesa, CA
Member No.: 17
Region Association: Southern California
I have to go fix my grandpa's car in the morning, I should be back working on it around 10 or 11. I dont know if I am going to try to do the tranny yet or wait till I take it back to the muffler shop and have them make the exhaust system removable. The way it is now, I would have to cut the rear supports to take the system out and then weld it back in when I am done. That just isnt right. I need to try to figure out what the deal is with the alternator though. Its not charging. I will be out there working on it most of the day if any of you want to stop by.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
neo914-6
post May 22 2005, 12:50 AM
Post #12


neo life
*****

Group: Members
Posts: 5,086
Joined: 16-January 03
From: Willow Glen (San Jose)
Member No.: 159
QUOTE (skline @ May 20 2005, 11:37 PM)
I worked alone today, kind of unusual. It got to be around 6 and I thought I still had plenty of daylight left and the car needed some things done to it. I needed to rebuild the water pump and seal up the Fuel pump block off plate which has leaked since I put the engine in. So I lifted up the passenger side rear and removed the water pump and took it into the garage. Bought a new impeller from my local supply house where I get a shops discount now since they all know me by name and I have spent so much money with them. Took it apart and put the new impeller on and then went to put it back in the car. Got it almost in and Slits and Toast show up. We chat for a bit while waiting for TonyAKAVW to show up. It starts getting dark so I jump back on the car to put it back together. I had to pull out the lights to see but got it all back in and hooked up and then fixed the block off plate and sealed it up. Started the car in the dark and noticed a very minor leak from one of the hoses. I will fix it in the morning. Still need to pull the tranny and install the new one with the H gear in it. I may or may not get to it tomorrow. I think I may try to drive it over to Joe's tomorrow to see how it handles on the freeway. That is if the tranny in there will hold up. We will just have to see how it goes tomorrow.  Anyone want to come help me swap out the tranny in the morning? With 2 people I think we can do it in about an hour or so.  :smash:

Scott,

(IMG:http://www.914world.com/bbs2/html/emoticons/clap.gif) You did lot's more car work than I. The weather was beautiful up here so I walked with my daughter downtown for crepes and then to her elementary school for the Farmers Market.

BTW, what's the impeller part number? I am going to take my Simpson w/p apart before I sell it. The housing is quite different compared to my new Renegade w/p.

I spoke to Mark whos also building a V8 and am planning another Porsche V8 get together. I need another target to get my car done! Chris is planning to rebuild his engine again...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
skline
post May 22 2005, 08:07 AM
Post #13


Born to Drive
*****

Group: Members
Posts: 7,910
Joined: 26-December 02
From: Costa Mesa, CA
Member No.: 17
Region Association: Southern California
Felix, I will send you a PM.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 9th May 2025 - 01:59 PM
Invision Power Board v9.1.4 © 2025  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...