 engine rpm mismatch..., how accurate is the dash? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| BGman |
 May 22 2005, 04:21 PM
Post
#1
|
|
Greg  Group: Members Posts: 87 Joined: 18-January 04 From: Owensboro, KY Member No.: 1,575 Region Association: None  |
Is it completely unusual to have a 200 rpm mismatch between the dash and a stand-alone tach/dwell meter that you hook directly to the coil? My gut feeling is to believe the meter in my hand.
-g |
   |
 
|
  |
Replies(1 - 7)
| BIGKAT_83 |
May 22 2005, 04:37 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,799 Joined: 25-January 03 From: Way down south Bogart,GA Member No.: 194 Region Association: South East States 
|
I've made a setup with a function generater to recalibrate tachs for V8 conversions and use it to check the tach and make sure its good before I go to the trouble of opening it up.
If you are only off 200rpm at 6K that would be better than any I've seen yet. The 7 or 8 I have done are all over the place from 5 to 20% wrong. Most reading to high. Remember that these are 30 years old. Bob (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) |
|
|
|
| ArtechnikA |
May 22 2005, 04:50 PM
Post
#3
|
|
rich herzog Group: Members Posts: 7,390 Joined: 4-April 03 From: Salted Roads, PA Member No.: 513 Region Association: None |
the Crane HI-6 has a tach-calibration function - also good for calibrating a shift light.
i haven't tried a factory tach but my AutoMeter has been spot-on. |
|
|
|
| BGman |
May 22 2005, 09:00 PM
Post
#4
|
|
Greg Group: Members Posts: 87 Joined: 18-January 04 From: Owensboro, KY Member No.: 1,575 Region Association: None |
Thanks Bob-
Your reply leads me to the obvious next question- if I know my tach is 200 rpm off, is there an easy way to true it? Ultimately you are right, 200 rpm is minor...BUT, if it is a fairly easy process I might give it a whirl... |
|
|
|
| bd1308 |
May 22 2005, 09:21 PM
Post
#5
|
|
Sir Post-a-lot Group: Members Posts: 8,020 Joined: 24-January 05 From: Louisville,KY Member No.: 3,501 |
hey, are you greg from bowling green? i've been trying to call you......
|
|
|
|
| Rhodes71/914 |
May 22 2005, 09:34 PM
Post
#6
|
|
Glacier Group: Members Posts: 1,374 Joined: 8-August 04 From: End of the Road, Alaska Member No.: 2,482 |
200 is not bad, mines off 1000.
|
|
|
|
| redshift |
May 22 2005, 10:00 PM
Post
#7
|
|
Bless the Hell out of you! Group: Members Posts: 10,926 Joined: 29-June 03 Member No.: 869 |
Mine is off exactly -200 at 5600.
M |
|
|
|
| BGman |
May 23 2005, 03:48 PM
Post
#8
|
|
Greg Group: Members Posts: 87 Joined: 18-January 04 From: Owensboro, KY Member No.: 1,575 Region Association: None |
Yep that is me...sorry I could not meet up with you this past weekend. I REALLY wanted to come- but had too many commitments at church sunday morning to be able to skip. Sounds like you guys had a good time.
I sent you a PM. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:36 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.