![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
Mueller |
![]()
Post
#1
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
If you have a Boxster or a 996 you can buy stainless headers for $100.
However they want $800 for these puppies for our 914's. They could have at least copied the better 2.0 HE's instead. Fire that marketing guy. ![]() |
![]() ![]() |
SirAndy |
![]()
Post
#2
|
Resident German ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 41,688 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California ![]() |
The welds look nice enough ...
(IMG:style_emoticons/default/popcorn[1].gif) |
JeffBowlsby |
![]()
Post
#3
|
914 Wiring Harnesses ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,549 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None ![]() ![]() |
Square port? Never understood why these cannot be pretty much just straight back pipes.
|
JmuRiz |
![]()
Post
#4
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,435 Joined: 30-December 02 From: NoVA Member No.: 50 Region Association: MidAtlantic Region ![]() ![]() |
Square port? Never understood why these cannot be pretty much just straight back pipes. I was thinking the same thing (IMG:style_emoticons/default/wacko.gif) |
Mueller |
![]()
Post
#5
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
Square port? Never understood why these cannot be pretty much just straight back pipes. I bet they just copied a set without even having a vehicle to test them on. Time and material could be saved if made straight (and better flow in theory) I see why so expensive now looking at add .... They are listed as "vintage" Porsche parts. (IMG:style_emoticons/default/smile.gif) |
porschetub |
![]()
Post
#6
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,708 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None ![]() |
Ha ha me too ,looks like they had lots of scrap pipe ? ,jeez someone give the guy a bender ,really nothing tuned length there...square port for 914???.
Ben where are you ?,you need to check them out. Appears the Chinese stuff has fitment issues,yes the welds look nice but a mate was doing a 16v conversion on a mk1 Golf and said the same about the welding and I pointed out a great deal of the bends were "fusion" welded,only filler welds were on the manifold plate and the 4 way connector,and guess what it didn't fit. |
ChrisFoley |
![]()
Post
#7
|
I am Tangerine Racing ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,937 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None ![]() ![]() |
Useless
|
mepstein |
![]()
Post
#8
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,325 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
|
Maltese Falcon |
![]()
Post
#9
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,708 Joined: 14-September 04 From: Mulholland SoCal Member No.: 2,755 Region Association: None ![]() ![]() |
A container ship full of Duct Tape couldn't fix the "Disconnect" between Pacific Rim auto products AND their manufacturers; that are heavily reliant on the impulsuve online shopper...that is going to "Get a DEAL"
Wait...WHAT; they make duct tape too ¿ (IMG:style_emoticons/default/laugh.gif) |
mb911 |
![]()
Post
#10
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,904 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest ![]() ![]() |
Ha ha me too ,looks like they had lots of scrap pipe ? ,jeez someone give the guy a bender ,really nothing tuned length there...square port for 914???. Ben where are you ?,you need to check them out. Appears the Chinese stuff has fitment issues,yes the welds look nice but a mate was doing a 16v conversion on a mk1 Golf and said the same about the welding and I pointed out a great deal of the bends were "fusion" welded,only filler welds were on the manifold plate and the 4 way connector,and guess what it didn't fit. Ugh.. |
rhodyguy |
![]()
Post
#11
|
Chimp Sanctuary NW. Check it out. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 22,098 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch ![]() |
Anyone who spends $800 on parts that are usually a 'give away' (OEM with the casings rusted off) fully deserves what they get for their hard earned money. I hope the seller is sitting on 100s of these pieces of shit.
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 17th June 2024 - 06:33 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |