Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Should I buy it?, I'd have to sell my truck!
Bucket
post Jun 26 2005, 12:36 AM
Post #1


Newbie
*

Group: Members
Posts: 16
Joined: 5-February 05
From: tucson az
Member No.: 3,562
I have found a 914 for sale in the area. So I called the guy.

Rust. The car has a hole below the battery about the size of a golf ball, But the rust was repaird. The hole was not patched. The car has had an under coat sprayed on it. The paint is newer dont now how old yet.

Motor 2.0 . The motor has had the top end rebuilt. The head has been ported and polished. It has a set of webber 44s, but they need to be rejeted. What damage would be done to the motor besides runnig hot if I dont get the carbs rejeted? How much should I spend on getting it rejeted? How reliable is this set up?

Some pics. I hope they work. http://pg.photos.yahoo.com/ph/toy4runner19...album?.dir=5dcf

This is what it comes down to. To get the car I have to sell my reliable toyota 4runner. I have put a lot of money in to my truck. Right now I'm a student, but Im whith in bike distence from school ( I could loss a few pounds too). But it gets up to around 120 in the Phoenix area. I also live in an apartment so I don't have a place to work on it. I could do small things to the car. They have small garages at my apatments. How much do you spend on maintenance?

I now every car is diffrent. I now alot has to do with the previous owners. The guy wants $3,000 do you thinck its worth the risk?

Thanks (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
2 Pages V  1 2 >  
 Reply to this topicStart new topic
Replies(1 - 19)
nebreitling
post Jun 26 2005, 01:00 AM
Post #2


Member Emeritus
****

Group: Members
Posts: 3,314
Joined: 26-March 03
From: San Francisco
Member No.: 478
howdy! welcome aboard!

since you'd have to sell your truck to buy the 914, i assume you don't have any money. no money + no place to work on your car = probably not the right time to sell your reliable truck and buy a 914. (IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif) just my opinion, though...

wait till you can afford to buy a 914 and hang onto your truck. then you'll be rock'n (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
jasons
post Jun 26 2005, 08:02 AM
Post #3


Jackstand Extraordinaire
****

Group: Members
Posts: 2,002
Joined: 19-August 04
From: Scottsdale, AZ
Member No.: 2,573
Region Association: None
QUOTE (nebreitling @ Jun 25 2005, 11:00 PM)
howdy! welcome aboard!

since you'd have to sell your truck to buy the 914, i assume you don't have any money. no money + no place to work on your car = probably not the right time to sell your reliable truck and buy a 914. (IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif) just my opinion, though...

wait till you can afford to buy a 914 and hang onto your truck. then you'll be rock'n (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif)

I have to agree. I don't think you should trade the reliability of a 4runner for a 914. Does your 4runner have good AC? You're gonna want that. Also, what year is the 914? Emissions may be a concern on 75 and later cars.

On that note.... I have a 914 which I think I have sold for around $3k. I would have "considered" a trade for an 89 4runner. I have always had a soft spot for the early 4runners. I think you should hang on to the truck though.

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MoveQik
post Jun 26 2005, 08:08 AM
Post #4


What size wheels can I fit?
****

Group: Members
Posts: 4,645
Joined: 5-April 05
From: Scottsdale, AZ
Member No.: 3,881
Region Association: Southwest Region
(IMG:http://www.914world.com/bbs2/html/emoticons/agree.gif)

I sold my 1st two 914s because I used tham as daily drivers. I was in your situation....school, etc. They just proved to be too unreliable and required too much routine maintenance. I say wait until you can buy a nicer 914 or until you can have it as a second car.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gint
post Jun 26 2005, 08:50 AM
Post #5


Mike Ginter
***************

Group: Admin
Posts: 16,083
Joined: 26-December 02
From: Denver CO.
Member No.: 20
Region Association: Rocky Mountains
(IMG:http://www.914world.com/bbs2/html/emoticons/agree.gif) with everyone so far. No money, no place to work on the car (drop a motor, etc...) and a need for a totally reliable auto = no 914

Ask Britt (bd1308) that same question.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bd1308
post Jun 26 2005, 08:55 AM
Post #6


Sir Post-a-lot
*****

Group: Members
Posts: 8,020
Joined: 24-January 05
From: Louisville,KY
Member No.: 3,501
yup...EXACTLY my situation. No money for 2nd car, no place to put 2nd car and no $$ for a nice 2.0 engine. I always liked the 80s toyota trucks with 5speed.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rick 918-S
post Jun 26 2005, 09:08 AM
Post #7


Hey nice rack! -Celette
***************

Group: Members
Posts: 20,489
Joined: 30-December 02
From: Now in Superior WI
Member No.: 43
Region Association: Northstar Region
Bunch a little old ladies! (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/huh.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif) It looks like a nice driver. Spend some money and bring it in for an estimate for the carb work. Then see if it's a car you want to drive everyday.

Here's what I would do, Sell the truck, Get the carbs done, drive the car, see my banker and purchase a new daily driver incase the teener leaves you on the freeway more than once a week. Listen, I can't believe these cars can't be made reliable. GO FOR IT Dude! (IMG:http://www.914world.com/bbs2/html/emoticons/monkeydance.gif)

And you little old ladies.... Jus kiddin... (IMG:http://www.914world.com/bbs2/html/emoticons/happy11.gif) Consider the source. My car is water cooled........ (IMG:http://www.914world.com/bbs2/html/emoticons/assimilate.gif)
User is online!Profile CardPM
Go to the top of the page
+Quote Post
bd1308
post Jun 26 2005, 09:14 AM
Post #8


Sir Post-a-lot
*****

Group: Members
Posts: 8,020
Joined: 24-January 05
From: Louisville,KY
Member No.: 3,501
it's true rick, these aircooled cars *CAN* be made reliable. Get some extra money together and get someone good to look at your heads and valve seats and stuff and get the carb stuff taken care of, then you'll have a nice 914 to drive around.

Hell my car lasted 2 years, and the engine didnt have anything done to it at all.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MoveQik
post Jun 26 2005, 09:28 AM
Post #9


What size wheels can I fit?
****

Group: Members
Posts: 4,645
Joined: 5-April 05
From: Scottsdale, AZ
Member No.: 3,881
Region Association: Southwest Region
QUOTE (rick 918-S @ Jun 26 2005, 07:08 AM)
Bunch a little old ladies! (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/huh.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif) It looks like a nice driver. Spend some money and bring it in for an estimate for the carb work. Then see if it's a car you want to drive everyday.

Here's what I would do, Sell the truck, Get the carbs done, drive the car, see my banker and purchase a new daily driver incase the teener leaves you on the freeway more than once a week. Listen, I can't believe these cars can't be made reliable. GO FOR IT Dude! (IMG:http://www.914world.com/bbs2/html/emoticons/monkeydance.gif)

And you little old ladies.... Jus kiddin... (IMG:http://www.914world.com/bbs2/html/emoticons/happy11.gif) Consider the source. My car is water cooled........ (IMG:http://www.914world.com/bbs2/html/emoticons/assimilate.gif)

The only problem with this idea is the whole"spend some money" part. When I was in college there was not a spare penny to be found. Well...unless I needed to buy beer.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Bucket
post Jun 26 2005, 12:10 PM
Post #10


Newbie
*

Group: Members
Posts: 16
Joined: 5-February 05
From: tucson az
Member No.: 3,562
The AC in my truck sucks! (IMG:http://www.914world.com/bbs2/html/emoticons/mad.gif)

I think I’ll listen to you all. I can just go down and buy a new car. I told my wife I would buy her a new mustang GT.

But I’m going to get my 914 or some other P-car first.

Thanks for all the help.

If any body in the area needs a hand turning a wrench in the area ( Phoenix area) drop me a line toy4runner1989@yahoo.com

(IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dead Air
post Jun 26 2005, 01:29 PM
Post #11


Senior Member
***

Group: Members
Posts: 1,268
Joined: 9-May 04
From: Buffalo, NY
Member No.: 2,042
My daily driver is a toyota truck. No truck=no work. No work=no money. No money = no 914.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SirAndy
post Jun 26 2005, 01:52 PM
Post #12


Resident German
*************************

Group: Admin
Posts: 41,676
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California
QUOTE (Bucket @ Jun 25 2005, 11:36 PM)
Rust. The car has a hole below the battery about the size of a golf ball, But the rust was repaird. The hole was not patched. The car has had an under coat sprayed on it.

ok, this part really concerns me ...

how the hell did the rust get *repaired* if the hole wasn't patched up?
the rust on top of the long is caused by battery acid dripping down on it. eventually it'll eat a hole in the top of the long. then the acid dripps *inside* the long. eventually it'll eat a hole throught the bottom of the long ...

with the hole still open, you need to have a GOOD look inside the long to figure out how far the rust has destroyed the inside. if it's bad, the car is a parts-car or needs major surgery ...

(IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif) Andy
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Bucket
post Jun 26 2005, 02:09 PM
Post #13


Newbie
*

Group: Members
Posts: 16
Joined: 5-February 05
From: tucson az
Member No.: 3,562
The hole is covered by the motor so you can see it. The guy said that the rust was removed ( I’m thinking sanded off ) and then painted. All rust is bad, but if this car is still for sale when I go to buy one should I stay away from it because of this? I could then fix the hole.
(IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SirAndy
post Jun 26 2005, 02:16 PM
Post #14


Resident German
*************************

Group: Admin
Posts: 41,676
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California
QUOTE (Bucket @ Jun 26 2005, 01:09 PM)
The hole  is covered by the motor so you can see it.

huh? the top of the long is visible from within the engine compartement. it's even easier to see if the car has carbs ...

if there's a hole that is "covered" by the engine, that would be the side or underside of the long, which would mean it has already rusted through.

the long is kind of like the spine of your car. a rusted through long can make your car fold in half.
and trust me, that's not a good thing!
(IMG:http://www.914world.com/bbs2/html/emoticons/huh.gif) Andy


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
gregrobbins
post Jun 26 2005, 02:53 PM
Post #15


Member: Team NARP
***

Group: Members
Posts: 1,515
Joined: 23-March 04
From: Arizona
Member No.: 1,844
Region Association: Southwest Region
Welcome. Like SirAndy, I would want to know more about the rust repair. If you need a second look, Bill, Jason, Mike, Mike, Gerard, Travis or any of the other 914 owners in the area would b happy to take a look. You will find that we are willing and able (some more than others (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) ) to help work, find parts or whatever.

Give me a call if I can be of help or if you have questions.

Greg
Glendale
623-297-4084
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MoveQik
post Jun 26 2005, 03:13 PM
Post #16


What size wheels can I fit?
****

Group: Members
Posts: 4,645
Joined: 5-April 05
From: Scottsdale, AZ
Member No.: 3,881
Region Association: Southwest Region
QUOTE (gregrobbins @ Jun 26 2005, 12:53 PM)
You will find that we are willing and able (some more than others (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) ) to help work, find parts or whatever.


Oh yeah....give me call anytime! I can turn a simple battery change into a weekend project. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
TravisNeff
post Jun 26 2005, 03:15 PM
Post #17


914 Guru
*****

Group: Members
Posts: 5,082
Joined: 20-March 03
From: Mesa, AZ
Member No.: 447
Region Association: Southwest Region
You have a great PHX resource here for second looks at the car, let us know - we'd love to help!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Bucket
post Jun 26 2005, 04:04 PM
Post #18


Newbie
*

Group: Members
Posts: 16
Joined: 5-February 05
From: tucson az
Member No.: 3,562
I meant you can’t see the hole. Can the long be repaired?
(IMG:http://www.914world.com/bbs2/html/emoticons/sawzall-smiley.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/welder.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
TravisNeff
post Jun 26 2005, 04:15 PM
Post #19


914 Guru
*****

Group: Members
Posts: 5,082
Joined: 20-March 03
From: Mesa, AZ
Member No.: 447
Region Association: Southwest Region
You'll need to take a look at how bad it is before you commit to purchasing the car. Sometimes rust seems pretty minimal until you start really diggin into it. It all can be fixed, time, $$, tools an patience is what it takes. If you need repairs, I can help (IMG:http://www.914world.com/bbs2/html/emoticons/welder.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dr. Roger
post Jun 26 2005, 04:30 PM
Post #20


A bat out of hell.
****

Group: Members
Posts: 3,944
Joined: 31-January 05
From: Hercules, California
Member No.: 3,533
Region Association: Northern California
QUOTE (Dave Eddy @ Jun 26 2005, 11:29 AM)
My daily driver is a toyota truck. No truck=no work. No work=no money. No money = no 914.

Ditto. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)

I didn't have all the above for a while, but now I do. And everything is cool.

Better than robbing banks.


Of course that didn't stop me whenI was broke from picking up a '63 Ghia convertible. The car was free. Added one rebuilt engine, battery, on a solid body and I drove that thing for several trouble free years. In fact it never let me down. =-)

I'm starting to think more like Ollah the Alien. (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) Look out!!! =-)

Go for it. It will make for great stories when you old. hehehhehee
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

2 Pages V  1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 8th June 2024 - 05:43 AM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...