Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Would an engine run..., with the injector connectors crossed?
BMartin914
post Jul 25 2005, 07:48 AM
Post #1


|||
***

Group: Members
Posts: 1,408
Joined: 30-May 04
From: Oregon
Member No.: 2,128
Region Association: Pacific Northwest



Pulled my harness this weekend (74 2.0 d-jet) and tagged all connections in the process of removal. As I was cleaning it up and doing some repairs I noticed that the grey boots on the injectors (black ones are missing) were in back. Should they not be in front? The motor ran before, but was having some problems. How big of a problem could this create?

This is the first time I have had the harness out, but I am sure that it has been out before. Makes me wonder. (IMG:http://www.914world.com/bbs2/html/emoticons/idea.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies(1 - 4)
Cap'n Krusty
post Jul 25 2005, 08:16 AM
Post #2


Cap'n Krusty
**********

Group: Members
Posts: 10,794
Joined: 24-June 04
From: Santa Maria, CA
Member No.: 2,246
Region Association: Central California



It'll run. The Cap'n
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Bruce Allert
post Jul 25 2005, 09:36 AM
Post #3


Hellions asleep
****

Group: Members
Posts: 3,289
Joined: 19-March 03
From: Eagle Creek, Orygun
Member No.: 441
Region Association: Pacific Northwest



I'd read somewhere that you can remember where they go with the saying, "Black in back". If you have the harness off use a meter & do a continuity test from the ECU connector block to each connector I think the bird board has a list of each connector as it is connected by number to the ECU block. That way you can see which connection end goes to where. I've done it a couple times with mine. It'll also tell you if you have a broken wire.

.....b
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dr Evil
post Jul 25 2005, 09:57 AM
Post #4


Send me your transmission!
***************

Group: Members
Posts: 23,032
Joined: 21-November 03
From: Loveland, OH 45140
Member No.: 1,372
Region Association: MidAtlantic Region



So long as they are on the right side, you will have no problem. IIRC, they fire in groups of two: L and R so if you swap your front and back it should be a non issue.

Am I mistaken?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
goose2
post Jul 25 2005, 10:31 AM
Post #5


Senior Member
***

Group: Members
Posts: 976
Joined: 30-March 05
From: Eugene, Oregon
Member No.: 3,847
Region Association: Pacific Northwest



QUOTE
they fire in groups of two: L and R so

Actually they fire in groups of 2 diagonally opposed cylinders....this is always a good clue when diagnosing trigger point problems.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 31st October 2024 - 05:23 PM