 NEED 100MM WHEEL STUDS ON MONDAY, At Runoffs please look at this post |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Thorshammer |
 Sep 18 2005, 09:36 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 749 Joined: 11-November 03 Member No.: 1,335  |
Thanks for looking.
I am at the Runoffs and another Porsche racer has brought some really nice lightweight wheels for me to use this week. Unfortunately, the wheels have a thicker mounting flange and my wheel studs are too short. Does anyone in Ohio or nearby have 20 of these studs 14X1.5 100mm long, Part number 930-331-100. Can anyone assist me in getting them by Monday??? I can order from Pelican for NDA shipment, but I'll miss a day of practice with these wheels. They are signifigantly lighter than what I have and should make a difference on the track. Help me Obi Wan Kanobie, your my only hope. Call me on the cell if you can. Erik Madsen 508-524-3145 |
   |
 
|
  |
Replies(1 - 7)
| Porsche Rescue |
Sep 18 2005, 09:55 PM
Post
#2
|
|
Saving and Enjoying Old Porsches Group: Members Posts: 2,978 Joined: 31-December 02 From: Bend, Oregon Member No.: 64 Region Association: None |
Sorry I can't offer any help, but how in the hell do you replace rear studs at the track? I can't imagine doing it. The front would be challenge enough.
|
|
|
|
| seanery |
Sep 18 2005, 10:27 PM
Post
#3
|
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,854 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
Isn't Stoddard close by (well, kinda close)? They may be able to help you out.
|
|
|
|
| Eddie914 |
Sep 18 2005, 10:28 PM
Post
#4
|
|
Unregistered |
If 911 rear brake rotors are used without the parking brake assembly, the studs can be driven out with a drift while the car is on the ground with the wheels in place. Simply remove the lowet lug nut, drive the stud out with a drift and a LARGE hammer (8 lb seems to work fine). The new stud can be inserted from the back of the hub/rotor, and pulled into place with a lug net.
Eddie |
|
|
|
| Thorshammer |
Sep 19 2005, 05:26 AM
Post
#5
|
|
Senior Member Group: Members Posts: 749 Joined: 11-November 03 Member No.: 1,335 |
Yes Eddie, Thats the plan.
Thanks guys for the thoughts. Stoddard opens in about 15 minutes, so I will be calling and sending someone if they have them. BTW, you would be surprised what you can do at the track, when you're a obsessed crackpot like me LOL!!!! Hope to get the new rubber scrubbed in today and the car completed. we should make it. Really want to run those wheels though. Erik |
|
|
|
| tdgray |
Sep 19 2005, 05:51 AM
Post
#6
|
|
Thank God Nemo is not here to see this Group: Members Posts: 9,705 Joined: 5-August 03 From: Akron, OH Member No.: 984 Region Association: None |
Erik,
Let me know if Stoddard does not have them. I have a dealer very close to me down here, Kempthorn Motors. I can run them up there this afternoon if need be. |
|
|
|
| Porsche Rescue |
Sep 19 2005, 08:04 AM
Post
#7
|
|
Saving and Enjoying Old Porsches Group: Members Posts: 2,978 Joined: 31-December 02 From: Bend, Oregon Member No.: 64 Region Association: None |
Thanks for the education Eddie and good luck Erik.
|
|
|
|
| Thorshammer |
Sep 19 2005, 09:25 PM
Post
#8
|
|
Senior Member Group: Members Posts: 749 Joined: 11-November 03 Member No.: 1,335 |
Got back to the Hotel and wanted to thank everyone for their offers. I next dayed them from performance products and will have the new wheels on tomorrow. Good thing as one of my other race wheels is bent. Crap. Thanks guys!
Erik Madsen |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th June 2024 - 01:40 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.