 Removing aluminum trim |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Poor-sche Lover |
 Dec 27 2005, 08:08 PM
Post
#1
|
|
Member  Group: Members Posts: 67 Joined: 25-November 05 From: SE Kansas Member No.: 5,190  |
So, I know how to remove all the trim from the sail panel and the windshield, but I can't figure out how to remove it for future use. I "practiced" removing it on my project car because the pieces were already trash. I tried my best to not bend anything, but I failed miserably. I would really like to reuse the trim, but I don't see how I can remove it from the good car without bending the crap out of it. Do you guys have any tips or anything? Thanks.
|
   |
 
|
  |
Replies(1 - 2)
| r_towle |
Dec 27 2005, 08:21 PM
Post
#2
|
|
Custom Member Group: Members Posts: 24,591 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
on the sail panels, you would need a tool that looks like a fork with two splines...
you would put that on either side of the pin and wedge it out... On the windshield, you need to do a search here, Chris Foley (Racerchris) had designed a tool specially for removing the trim without wrecking it. It can be done, and it can be bent back, be patient going either way. Rich |
|
|
|
| xsboost90 |
Dec 28 2005, 07:10 AM
Post
#3
|
|
Senior Member Group: Members Posts: 1,393 Joined: 2-August 04 From: cincinnati Member No.: 2,432 |
you can bend it somewhat w/o ruining it, itll bend back when you reinstall...but removing it wasnt too hard IIRC, just look at your other car and see how it works..then take your time. (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif)
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th June 2024 - 11:07 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.