![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
KJJ-74-914 |
![]()
Post
#1
|
Newbie ![]() Group: Members Posts: 30 Joined: 28-November 03 From: Antioch, IL Member No.: 1,401 ![]() |
I have a 1.8 converted with a larger Bore and Euro Pistons. Do I adjust the valves for a 1.8 or 2.0 engine?
I see the spec is the same. Never mind...thanks for looking though!! |
![]() ![]() |
Dave_Darling |
![]()
Post
#2
|
914 Idiot ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 15,200 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California ![]() ![]() |
The spec is not the same. Valve gaps on the 1.8 motor are 0.006" for both intake and exhaust. The 2.0 motor, with its sodium-filled exhaust valves, uses a 0.008" exhaust valve gap, but the standard 0.006" intake gap.
Unless you found some (very rare) sodium-filled 1.8 exhaust valves, use the 0.006" spec just like a standard 1.8 does. --DD |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 11th July 2025 - 03:38 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |