Parts stash |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Parts stash |
watsonrx13 |
Apr 21 2006, 05:25 PM
Post
#1
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
Well, I've finally went through most of the boxes that came with the '74 2.0l I bought in February. Anyway, the stash came with a complete set of seals from Tweeks. Here's the wide view....
Here's a close up. Another close up. You'll notice in the center is an original interior windshield seal. Another close up. Here's some of the hardware. You'll notice in the lower right corner the original black pop-rivets for the threshold plates. Here's some more parts. You'll notice in the lower right corner the window guide end pieces. Finally, here's the lower chrome strips that go on the bottom of the sail panel vinyl. |
watsonrx13 |
Apr 21 2006, 05:28 PM
Post
#2
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
|
Andyrew |
Apr 21 2006, 05:30 PM
Post
#3
|
Spooling.... Please wait Group: Members Posts: 13,376 Joined: 20-January 03 From: Riverbank, Ca Member No.: 172 Region Association: Northern California |
Wow... thats like 1500 to 2k worth of parts there! depending on when you bought it!
|
watsonrx13 |
Apr 21 2006, 05:34 PM
Post
#4
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
Finally a couple of questions regarding installation....
1. How does the spring on the driver's side arm rest attach? 2. These are the rubber seals for the targa top, one is longer than the other. Do I need to trim to fit? 3. Does anyone have (6) of the allen-head bolts that the arms rests are attached with? Also, does anyone have (1) of the 'square' bolt inserts that go into the door where these bolts attach to? 4. Does anyone have (6) of the little black plastic caps that cover the screws in the roll bar pad? 5. Does anyone have an extra hinge for the center arm rest? |
robby750 |
Apr 21 2006, 05:34 PM
Post
#5
|
Senior Member Group: Members Posts: 646 Joined: 6-April 03 From: Lexington, Ky Member No.: 521 Region Association: South East States |
You ski alot in Florida?
|
watsonrx13 |
Apr 21 2006, 05:35 PM
Post
#6
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
|
watsonrx13 |
Apr 21 2006, 05:37 PM
Post
#7
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
Nope, I don't water or snow ski, but the car was moved from Michigan...
BTW, if anyone is interested in the ski rack send me a PM, it's definately not going on a FL car.... (IMG:style_emoticons/default/biggrin.gif) You ski alot in Florida? |
robby750 |
Apr 21 2006, 05:39 PM
Post
#8
|
Senior Member Group: Members Posts: 646 Joined: 6-April 03 From: Lexington, Ky Member No.: 521 Region Association: South East States |
The spring attaches through the door panel. There should be a small hole in the panel and the end of the spring will go through it and hook onto the door.
|
watsonrx13 |
Apr 21 2006, 05:41 PM
Post
#9
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
|
jd74914 |
Apr 21 2006, 05:44 PM
Post
#10
|
Its alive Group: Members Posts: 4,782 Joined: 16-February 04 From: CT Member No.: 1,659 Region Association: North East States |
heres a ski rack (IMG:style_emoticons/default/smile.gif)
Attached image(s) |
watsonrx13 |
Apr 21 2006, 05:47 PM
Post
#11
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
So the rack that I have, do I need to take it apart and install the ends separately?
|
Andyrew |
Apr 21 2006, 05:51 PM
Post
#12
|
Spooling.... Please wait Group: Members Posts: 13,376 Joined: 20-January 03 From: Riverbank, Ca Member No.: 172 Region Association: Northern California |
It apears as if your rack loads the ski's vertically... as aposed to horizontally like the one pictured....
Take off your bumper and test fit it! (lay down lots of painters tape to protect your paint...) |
jasons |
Apr 21 2006, 06:06 PM
Post
#13
|
Jackstand Extraordinaire Group: Members Posts: 2,002 Joined: 19-August 04 From: Scottsdale, AZ Member No.: 2,573 Region Association: None |
I think the ski rack inserts in one of the rectangular plugs at the top of the windshield frame and fastens to the 3 holes in the underside-rear of the top.
Nice Score of parts BTW! |
Chris Pincetich |
Apr 21 2006, 06:53 PM
Post
#14
|
B-) Group: Members Posts: 2,082 Joined: 3-October 05 From: Point Reyes Station, CA Member No.: 4,907 Region Association: Northern California |
All the parts listed in 3. 4. and 5. parts requests i will gladly rip off of my car to trade for some of those new seals!! I'm sooooo jelous, but also inspired that this kind of treasure trove might be waiting at the next "parts car" for sale.
From the looks of all your other concourse quality 914s, I'm guessing a trip to the hardware store is not an option for that interior hardware, but I've been able to take care of most of the bits you've asked about combing through the SS and specialized hardware bins. You scored (IMG:style_emoticons/default/beerchug.gif) |
blitZ |
Apr 21 2006, 07:25 PM
Post
#15
|
Beer please... Group: Members Posts: 2,223 Joined: 31-August 05 From: Lawrenceville, GA Member No.: 4,719 Region Association: South East States |
So, you're teasing us with all these parts pictures? I'll give you $50 for the windshield seal. (IMG:style_emoticons/default/drooley.gif)
|
tod914 |
Apr 21 2006, 07:35 PM
Post
#16
|
Advanced Member Group: Members Posts: 3,755 Joined: 19-January 03 From: Lincoln Park, NJ Member No.: 170 |
Despite your CW score, the car looks great too! gl with it.
|
watsonrx13 |
Apr 21 2006, 08:15 PM
Post
#17
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
|
URY914 |
Apr 21 2006, 08:18 PM
Post
#18
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 121,038 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
Rob,
Did you do this just to piss people off? Don't tell them what you paid for the car AND the parts...... |
watsonrx13 |
Apr 21 2006, 08:26 PM
Post
#19
|
Advanced Member Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States |
Yea, let's keep that to ourselves.... I'm still planning to get the car back together, then offering it for sale.... I just want to get as many cars back on the road as I can....
Rob, Did you do this just to piss people off? Don't tell them what you paid for the car AND the parts...... |
r_towle |
Apr 21 2006, 08:37 PM
Post
#20
|
Custom Member Group: Members Posts: 24,588 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
Finally a couple of questions regarding installation.... 1. How does the spring on the driver's side arm rest attach? 2. These are the rubber seals for the targa top, one is longer than the other. Do I need to trim to fit? 3. Does anyone have (6) of the allen-head bolts that the arms rests are attached with? Also, does anyone have (1) of the 'square' bolt inserts that go into the door where these bolts attach to? 4. Does anyone have (6) of the little black plastic caps that cover the screws in the roll bar pad? 5. Does anyone have an extra hinge for the center arm rest? I have #3 and #4 no problem. The hinge is a simple piano hinge..all that I have seen are rusted.. Get on at the harware sote, cut to fit as needed. I will gladly trade whatever you need for the ski rack. I have 6 doors to pull parts from. Rich |
Lo-Fi Version | Time is now: 8th June 2024 - 02:21 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |