Oklahoma Roll call, How many okies do we have on the forum? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Oklahoma Roll call, How many okies do we have on the forum? |
mrdezyne |
Sep 5 2006, 04:08 PM
Post
#1
|
Now on larger rolling jack stands! Group: Members Posts: 468 Joined: 31-July 05 From: Tulsa, OK Member No.: 4,510 |
I've seen several newbies online lately from Oklahoma, how many do we have running around total?
If I had a running teener I would suggest a state wide get together this fall but right now mine does not even roll. (IMG:style_emoticons/default/huh.gif) So if you are from the Sooner state chime in and say howdy. (IMG:style_emoticons/default/popcorn[1].gif) |
okieflyr |
Sep 5 2006, 06:12 PM
Post
#2
|
9fauxteen Group: Members Posts: 816 Joined: 9-January 05 From: Phila PA Member No.: 3,426 Region Association: North East States |
Howdy! Norman is my home town, but I'm relocated outside of Philadelphia for about 12 years now. I used to hang out at Bob Dumonts' place years ago, and BRI as well. I was envious of the Tallahina drive awhile back, made me home sick.
Kevin I've seen several newbies online lately from Oklahoma, how many do we have running around total? If I had a running teener I would suggest a state wide get together this fall but right now mine does not even roll. (IMG:style_emoticons/default/huh.gif) So if you are from the Sooner state chime in and say howdy. (IMG:style_emoticons/default/popcorn[1].gif) |
project-914 |
Sep 5 2006, 10:34 PM
Post
#3
|
Member Group: Members Posts: 181 Joined: 2-August 06 From: Oklahoma Member No.: 6,571 |
CENTRAL OKC!!! WERD UP!!!...I'm glad I found this thread...I'm 17 and my dad just bought me a $700 914 that runs (father son streetable racecar project...aww)...but it's pretty much a piece of sh1t...my actual car is a 2002 wrx...but this is teh new project which will be prepared for hallett by hopefully the next season...but who knows...right now it's tear down time and fix teh chassis up!...
let's hang out sometime!!! I'll be in teh suby though since the 914 is in shambles |
GWN7 |
Sep 6 2006, 12:04 AM
Post
#4
|
King of Road Trips Group: Members Posts: 6,280 Joined: 31-December 02 From: Winnipeg, MB, Canada Member No.: 56 Region Association: Northstar Region |
|
jr91472 |
Sep 6 2006, 06:11 AM
Post
#5
|
"I'm pacing myself sergeant..." Group: Members Posts: 1,205 Joined: 2-August 04 From: McKinney, TX Member No.: 2,437 |
You guys make sure and check out the MUSR 8 nailed thread in the Garage. Ft Smith, AR in Oct is a short drive for you guys.
see you there. JR |
mrdezyne |
Sep 6 2006, 08:43 AM
Post
#6
|
Now on larger rolling jack stands! Group: Members Posts: 468 Joined: 31-July 05 From: Tulsa, OK Member No.: 4,510 |
YES! Another suby convert in OK! Hopefully you have some good contacts for fine tuning once I get mine on the ground again. The two of you in OKC need to get together and take a cruise up north to Tulsa. I have parts for ayama, and maybe some ideas for Project on his conversion. At least you can see how far along I am, or not...
I missed the last MUSR but if I can catch a ride in a teener with someone this year I'll be there.... oh, that is if it does not fall on the same week/weekend as SEMA in Vegas. Headed down there to check out a couple other Suby conversions and maybe that trick retractable wing. |
project-914 |
Sep 6 2006, 07:29 PM
Post
#7
|
Member Group: Members Posts: 181 Joined: 2-August 06 From: Oklahoma Member No.: 6,571 |
yeah supermoose from rs25.com is hooking me up with a complete JDM ej20t with wiring harness and ecu for 1650 shipped! w00t!!!...I need to get a welder this weekend and start practicing for te big build...hey did you do the renegade kit? or fab your own?...I am leaning towards renegade to save me trouble haha...I also need to align door panels and the hood and trunk...this car is a junker I mean gosh!...I was going to shim a few things so they fit better but we'll see...also, I got some good universal weatherstripping pieces to save money...all I need now is the front window seal that runs along the top and sides and the ones that go on the triangle windows...becuase there's no way a universal piece will fit...also is there a way you can just repair the old seals with like rubber goo that dries?...mine would still work they are just kinda torn...
|
MBowman325 |
Sep 6 2006, 08:25 PM
Post
#8
|
Member Group: Members Posts: 465 Joined: 14-July 05 From: Oklahoma City, OK Member No.: 4,413 Region Association: Southwest Region |
I'll be running up to Tulsa for a few hours some weekend in September to visit a friend and work on her computer. Haven't decided yet if I'll take the 914 or something with a radio... It's a long trip to make without some tunes, not that I could hear them on the way there anyways.
Not sure why I'd complain about that, I did pick the car up in LA and drive it through AZ and NM and part of Texas.... (IMG:style_emoticons/default/burnout.gif) I bet gas is lookin pretty cheap up there right about now too! |
mrdezyne |
Sep 6 2006, 10:27 PM
Post
#9
|
Now on larger rolling jack stands! Group: Members Posts: 468 Joined: 31-July 05 From: Tulsa, OK Member No.: 4,510 |
There are a couple other guys in Owasso that have teeners and Brian at RennSport has a few and runs one at Hallet.
Gas is on the steady decline here, today it dropped below the $2.40 mark! Send me an IM when you are headed up, I need a ride to get motivated to finish mine! |
javadog |
Sep 7 2006, 07:11 AM
Post
#10
|
Newbie Group: Members Posts: 20 Joined: 3-July 06 From: Tulsa, OK Member No.: 6,358 |
Well, I spend a lot more of my time on the Pelican 911 board, as you might guess from my post count on this board, but I lurk here occasionally to gather information for a car I am working on. I have two 914s; a '71 six, and a '74 four that will end up as a track/autocross car.
JR |
MBowman325 |
Sep 7 2006, 04:22 PM
Post
#11
|
Member Group: Members Posts: 465 Joined: 14-July 05 From: Oklahoma City, OK Member No.: 4,413 Region Association: Southwest Region |
There are a couple other guys in Owasso that have teeners and Brian at RennSport has a few and runs one at Hallet. Gas is on the steady decline here, today it dropped below the $2.40 mark! Send me an IM when you are headed up, I need a ride to get motivated to finish mine! Be careful, a little inspiration can be dangerous. (IMG:style_emoticons/default/drunk.gif) Be happy to provide a ride/motovation for you though! I tend to just goto Waggoner, but we also normally run up to Tulsa for a few hours too. A station of less than stellar reputation has 87 Oct for 2.299/gal. United (supermarket) has it for 2.399/gal, which is typically the cheapest of the mainstream/repudable stations. (Checked MPG, and with some City and a trip to Hurst, my 914 just got 26.88. Need to backdate the exhaust.) |
project-914 |
Sep 10 2006, 07:09 PM
Post
#12
|
Member Group: Members Posts: 181 Joined: 2-August 06 From: Oklahoma Member No.: 6,571 |
does anyone do autobody media blasting in OKC?...come to think of it I don't feel like sanding down the whole car (IMG:style_emoticons/default/smile.gif)
|
So.Cal.914 |
Sep 10 2006, 07:24 PM
Post
#13
|
"...And it has a front trunk too." Group: Members Posts: 6,588 Joined: 15-February 04 From: Low Desert, CA./ Hills of N.J. Member No.: 1,658 Region Association: None |
I flew over OK once, does that count? (IMG:style_emoticons/default/smile.gif)
|
project-914 |
Sep 10 2006, 07:50 PM
Post
#14
|
Member Group: Members Posts: 181 Joined: 2-August 06 From: Oklahoma Member No.: 6,571 |
damn, I thought you had some media blasting info...haha, it only counts if you have a car here...and can go to meets...unless it doesn't run...like mine hehe
|
poorsha73 |
Sep 12 2006, 03:35 PM
Post
#15
|
Newbie Group: Members Posts: 1 Joined: 12-September 06 From: Oklahoma Member No.: 6,827 |
I just joined the forum today, although I've owned my 914 for almost 10 years.
I live just outside Shawnee, OK. (IMG:style_emoticons/default/beerchug.gif) |
project-914 |
Sep 12 2006, 10:14 PM
Post
#16
|
Member Group: Members Posts: 181 Joined: 2-August 06 From: Oklahoma Member No.: 6,571 |
damn that's like 4-5 people...we need to HANG OUTTT!!!
werd... |
brant |
Sep 12 2006, 10:18 PM
Post
#17
|
914 Wizard Group: Members Posts: 11,640 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains |
Hey fellas...
I'm coming to hallet in about a month.. anyone want to come out to hallet and see some vintage racing? brant |
project-914 |
Sep 13 2006, 04:11 PM
Post
#18
|
Member Group: Members Posts: 181 Joined: 2-August 06 From: Oklahoma Member No.: 6,571 |
sure, I think I'm going...my suby friend blake runs a classic car (maybe an MG, not sure) there as well as his suby...also a 914 guy with a saab turbo swap named mike also goes...met him last time, I'm thinking about going up if it's on a weekend of if I'm not working on my 914...
|
brant |
Sep 13 2006, 04:21 PM
Post
#19
|
914 Wizard Group: Members Posts: 11,640 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains |
|
project-914 |
Sep 13 2006, 04:40 PM
Post
#20
|
Member Group: Members Posts: 181 Joined: 2-August 06 From: Oklahoma Member No.: 6,571 |
a friend of mine is renting the track with me for 10/6 I think...which is pretty cool...if any of you out of town guys get there in that early evening then I'll chec it out!...I am still not FOR SURE, but it's likely...look for a red/gold suby wrx!
|
Lo-Fi Version | Time is now: 10th June 2024 - 02:09 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |