 Installing Rear Stabilizer Bar, Factory Mounting rear Stabilizer Bar |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| HillKing |
 Mar 18 2008, 01:34 PM
Post
#1
|
|
Self taught incompetent  Group: Members Posts: 62 Joined: 11-January 08 From: Cody, Wyoming Member No.: 8,563 Region Association: None  |
I have a factory supplied rear stabilizer bar for HillKing. My question is has anyone out there installed one of these into a car that did not have one from factory? Looking at the Stoddard book they show a 914.507.027.10 "securing plate" for 75-76 year car and a 914.501.259.11GVR for 73-74 cars. They also show part 914.501.532.71 reinforcement for both securing plates. Pelican shows this in their diagrams as well. Looking at the car there appears to already be holes for the bolt up stamped in the sheetmetal under the trunk crossbrace. So it looks as if the securing plate goes into the void between the upper engine compartment sheet metal and the trunk cross brace. Do you have to cut out on the topside to mount the securing plate and I assume the "reinforcement" would weld on after? Anybody using this setup?
|
   |
 
|
  |
Replies
| davep |
Mar 18 2008, 02:39 PM
Post
#2
|
|
914 Historian Group: Benefactors Posts: 5,151 Joined: 13-October 03 From: Burford, ON, N0E 1A0 Member No.: 1,244 Region Association: Canada  |
It should be just a simple welding job on both sides of the trunk floor.
|
|
|
|
Posts in this topic
HillKing Installing Rear Stabilizer Bar Mar 18 2008, 01:34 PM
SirAndy the reinforcement plates go inside the rear trunk.... Mar 18 2008, 06:43 PM sixnotfour Just like Andy, Factory installed Mar 30 2008, 10:41 AM J P Stein I wouldn't use a rear sway bar unless you have... Mar 30 2008, 12:10 PM
Racer
I wouldn't use a rear sway bar unless you hav... Apr 15 2008, 04:56 PM SirAndy
Why is that? Others have mentioned this too. I... Apr 15 2008, 05:42 PM J P Stein "Funny" things happen to 914s as you add... Apr 15 2008, 07:07 PM craig downs So with no rear bar do you dial in the rear suspen... Apr 24 2008, 07:33 PM J P Stein
So with no rear bar do you dial in the rear suspe... Apr 24 2008, 08:47 PM craig downs Interesting
Thanks J P Apr 24 2008, 11:12 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 05:26 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.