 Broken fan blades, and thermostat/tin question., How many is too many? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| LowGT |
 Jul 1 2008, 07:16 PM
Post
#1
|
|
1.8 and Proud!  Group: Members Posts: 583 Joined: 2-October 05 From: Wylie, TX Member No.: 4,904 Region Association: Southwest Region  |
I'm in the process of re-sealing a 74 1.8 and after taking off the cooling fan I see one blade is broken and gone. Is this going to throw everything out of whack, or is one missing blade negligible?
Second, the thermostat is shot and has no cable. Normally this wouldn't concern me since the flap should fail to the safe UP position. However, after removing the tin I found the flapper was locked down over the oil cooler by the lower tin piece. I took everything apart because of fuel vapor lock and the engine getting sluggish after driving for a while, so I was concerned about cooling issues. Other than that the car was running fine. Should I be worried about any serious complications? Dan |
   |
 
|
  |
Replies
| davep |
Jul 1 2008, 07:26 PM
Post
#2
|
|
914 Historian Group: Benefactors Posts: 5,154 Joined: 13-October 03 From: Burford, ON, N0E 1A0 Member No.: 1,244 Region Association: Canada  |
Jake makes sure his balanced assemblies even have the bolts indexed to specific locations. A missing blade is pretty significant in comparison. Still, there are a lot of engines running with missing fins. If you have the opportunity to replace it, then I would do so.
In the thermostat, I would always ensure it is working properly. It makes a big difference in getting the engine up to temperature quickly. Parts are cheap. |
|
|
|
Posts in this topic
LowGT Broken fan blades, and thermostat/tin question. Jul 1 2008, 07:16 PM
Pat Garvey
I'm in the process of re-sealing a 74 1.8 and... Jul 1 2008, 07:30 PM
LowGT
The missing blade on the fan(where did it go?) w... Jul 1 2008, 07:40 PM kwales Look in the fan shroud for the missing blade.
Fou... Jul 1 2008, 07:35 PM Jake Raby One blade is good for a 4 gram differential in bal... Jul 1 2008, 08:24 PM zymurgist
One blade is good for a 4 gram differential in ba... Jul 2 2008, 06:07 AM type47
On another car site that I used to frequent, this... Jul 2 2008, 07:30 AM zymurgist
On another car site that I used to frequent, thi... Jul 2 2008, 01:58 PM type47
[quote name='type47' post='1051699' date='Jul 2 2... Jul 2 2008, 02:26 PM zymurgist
fix what ya got, sell it before you replace it... Jul 2 2008, 02:35 PM SirAndy
Second, the thermostat is shot and has no cable. ... Jul 1 2008, 08:29 PM james2 It's obvious that the rodent in your avatar ca... Jul 2 2008, 04:34 PM LowGT
It's obvious that the rodent in your avatar c... Jul 2 2008, 08:44 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 12th June 2024 - 03:35 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.