 Accelerator will not return to idle |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Jul 17 2008, 09:24 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
I have weber 40 idf carbs with a bugpack linkage. Is there supposed to be a spring on the accelerator pedal that returns the pedal idle or are the springs on the carbs the only springs to return the pedal to idle?
Thanks again- Steve |
   |
 
|
  |
Replies
| davep |
Jul 18 2008, 11:33 AM
Post
#2
|
|
914 Historian Group: Benefactors Posts: 5,345 Joined: 13-October 03 From: Burford, ON, N0E 1A0 Member No.: 1,244 Region Association: Canada  |
The pedal itself should provide some spring action. New ones do, worn out ones don't.
The bushings in the pedal cluster require regular maintenance. Brake fluid will cause the plastic bushings to swell and bind. Annual inspections can warn of impending failure. A few people on the forum offer cluster rebuild services. |
 |
|
Posts in this topic
tornik550 Accelerator will not return to idle Jul 17 2008, 09:24 PM
rebelmdot Spring on Carb is the only one. I had similar pro... Jul 17 2008, 09:40 PM
tornik550
Spring on Carb is the only one. I had similar pr... Jul 18 2008, 07:29 AM rebelmdot I made that little piece to accomodate the large s... Jul 18 2008, 07:51 AM tornik550
I made that little piece to accomodate the large ... Jul 18 2008, 08:18 AM SGB I have Webers, but use 3 springs; one at the end o... Jul 17 2008, 09:54 PM jmill He's got a single and you have duals. If you ... Jul 18 2008, 08:38 AM Cap'n Krusty Too much spring can be worse, for the car, than no... Jul 18 2008, 08:59 AM rebelmdot Cap'n, I am relatively new to this, and I did ... Jul 18 2008, 09:37 AM rhodyguy :agree: x2 w/the cap'n on this one. the cable ... Jul 18 2008, 11:20 AM Vacca Rabite The Weber tech manual for VW applications suggests... Jul 18 2008, 11:48 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 24th December 2025 - 02:06 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.