|
|

|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| spotontheroad |
Aug 9 2008, 04:44 PM
Post
#1
|
|
Newbie ![]() Group: Members Posts: 7 Joined: 25-July 08 From: Worcestershire, England Member No.: 9,353 Region Association: England |
I found a previous posting where someone asked "what was the widest wheel that could be fitted to a 914 with standard fenders/wings" and the concensus was that 7" will fit on the rear. What I would like to know is: what is the measurement of offset of such wheels and also what is the widest that can be snsibly fitted to the front and again, what offset?
Has anyone fitted Minilites to their 914 and if so what spec? All replies gratefully received. Keith |
![]() ![]() |
| mskala |
Aug 9 2008, 07:18 PM
Post
#2
|
|
R ![]() ![]() ![]() Group: Members Posts: 1,935 Joined: 2-January 03 From: Massachusetts Member No.: 79 Region Association: None
|
The best offset for the rear is about 36mm, which is actually what you'll find on all
the 6" fuchs and cookie cutters. If you want at least a 205 wide tire without mangling your fenders this is about as good as it gets without having to test fit or adjust camber or have stiff springs, etc. The next closest thing (5-lug porsche pattern) is the early boxster rear wheels, which are 7x16 40mm offset and worked well for me. Other than that you'll have to go custom or aftermarket, or get 911R 49mm offset ($$$), or late 7x15 phone dials (52mm) and use a spacer. |
spotontheroad Wide wheels/ narrow body revisited Aug 9 2008, 04:44 PM
r_towle you could probably fit 8 inch or more rims...it w... Aug 9 2008, 04:48 PM
Racer Most Porsche 7x15" wheels have a 23mm offset.... Aug 9 2008, 04:57 PM
Garold Shaffer
Minilite makes a 6.5x15 that is a great fit on ... Aug 9 2008, 09:47 PM
pete-stevers i have pulled my fenders.. about an inch and a hal... Aug 9 2008, 05:00 PM
Cire
i have pulled my fenders.. about an inch and a ha... Jan 19 2010, 05:30 AM
brant
I found a previous posting where someone asked ... Aug 9 2008, 05:50 PM
rdauenhauer
i have pulled my fenders.. about an inch and a ha... Aug 9 2008, 06:21 PM
drgchapman Just finished going through this whole thing.
I ra... Aug 9 2008, 08:00 PM
orange914 i'm running 205 x 15 kumo ecsta on 5.5 rim. a... Aug 9 2008, 09:21 PM
Dan (Almaden Valley) I ran 7" custom steelies on the Puttputt. II... Aug 9 2008, 09:33 PM
Dan (Almaden Valley) another shot of the 7x15s on the Phoenix Red car. Aug 9 2008, 09:38 PM
brant repeating myself...
but you'll find 1 in 10, m... Aug 10 2008, 12:47 AM
plymouth37
repeating myself...
but you'll find 1 in 10, ... Aug 10 2008, 12:56 AM
jcd914 Way back when I Auto-x'd my 914 (it ran back t... Aug 10 2008, 01:33 AM
slow914 http://i307.photobucket.com/albums/nn316/legendpri... Aug 10 2008, 04:47 PM
Justin Fischer 16x6 with 205/50's could have fit 205/55's... Aug 10 2008, 07:42 PM
9146986 Most of the 911 Fuchs wheels that are fitted to 91... Aug 11 2008, 07:01 AM
mskala If you have decent negative camber, you may be abl... Aug 11 2008, 09:26 PM
mskala pic #2 Aug 11 2008, 09:26 PM
mskala Also, my former setup, 205/45/16 Kumho Ecsta V700
... Aug 11 2008, 09:29 PM
Justinp71 These mini flares allow for 225s on 8 inch rims, h... Aug 11 2008, 11:37 PM
spotontheroad Many thanks for all the replies - the concensus se... Aug 15 2008, 03:17 PM![]() ![]() |
|
Lo-Fi Version | Time is now: 2nd November 2025 - 01:49 AM |
| All rights reserved 914World.com © since 2002 |
|
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |