 Rear trailing arm replacement...Issues, trailing arms attachment bolts |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914rhatt |
 Aug 18 2008, 11:34 PM
Post
#1
|
|
Newbie  Group: Members Posts: 23 Joined: 7-July 08 From: Tonopah, Nevada Member No.: 9,263 Region Association: Intermountain Region  |
HELP!!!!! I am restoring my 1971 914 and I have been working on the rear trailing arms... I was able to get 3 of the 6attachment bolts out without breaking them, but there were three more that broke off...So my question is what is the best way to get these broken bolts out???... I am really trying to get this back to a rolling chasis before the snow flies....so ANY one who has done this please pontificate on the manner I can get these broken bolts out????
Any help would be greatly appreciated 914 Rhatt (IMG:style_emoticons/default/unsure.gif) |
   |
 
|
  |
Replies
| sean_v8_914 |
Aug 19 2008, 12:50 AM
Post
#2
|
|
Chingon 601 Group: Members Posts: 4,011 Joined: 1-February 05 From: San Diego Member No.: 3,541 |
yup, what Rich said. there are plastic plugs covering the threaded holes. you can squirt some penetrating oil in teh threads from teh back side. if it is really stubborn, heat it up till it smokes (about 2 songs on teh radio, time wise that is)
dont be in a hurry. drill it straight. be careful, drill is centered |
|
|
|
| 914rhatt |
Aug 19 2008, 12:56 AM
Post
#3
|
|
Newbie Group: Members Posts: 23 Joined: 7-July 08 From: Tonopah, Nevada Member No.: 9,263 Region Association: Intermountain Region |
QUOTE(sean_v8_914 @ Aug 18 2008, 11:50 PM)  yup, what Rich said. there are plastic plugs covering the threaded holes. you can squirt some penetrating oil in teh threads from teh back side. if it is really stubborn, heat it up till it smokes (about 2 songs on teh radio, time wise that is) dont be in a hurry. drill it straight. be careful, drill is centered Thanks...so the plasic plugs can be taken off? and I can spray penetrating oil into the holes...great...Thanks |
|
|
|
Posts in this topic
914rhatt Rear trailing arm replacement...Issues Aug 18 2008, 11:34 PM
r_towle Go to a decent hardware store and buy several coba... Aug 18 2008, 11:43 PM
914rhatt
Go to a decent hardware store and buy several cob... Aug 18 2008, 11:55 PM r_towle 1/8, 3/16, 1,4, all the way up to the proper one f... Aug 19 2008, 12:02 AM 914rhatt
1/8, 3/16, 1,4, all the way up to the proper one ... Aug 19 2008, 12:21 AM Wilhelm
[quote name='r_towle' post='1068629' date='Aug 18... Aug 19 2008, 12:35 AM 914rhatt
[quote name='r_towle' post='1068629' date='Aug 1... Aug 19 2008, 12:44 AM rhodyguy in case you don't know, not WD40. pbblaster, a... Aug 19 2008, 07:38 AM 914rhatt
in case you don't know, not WD40. pbblaster, ... Aug 19 2008, 10:39 PM KELTY360 Can't be said enough times:
Be patient.
Be v... Aug 19 2008, 11:27 PM 914rhatt
Can't be said enough times:
Be patient.
Be ... Aug 19 2008, 11:57 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th June 2024 - 07:51 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.