![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
r_towle |
![]()
Post
#1
|
Custom Member ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,591 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States ![]() ![]() |
Instead of drilling and welding in a bung for an O2 sensor prior to the muffler,(clients car) how accurate would a tailpipe extension tube with an O2 sensor be?
Im thinking of a 1 foot long tailpipe extension with the O2 sensor welded in as close to the muffler as possible, yet without touching the stock system. I intend to clamp the pipe in place with a stainless sleeve clamp so its air tight. Any thoughts? Rich |
![]() ![]() |
orange914 |
![]()
Post
#2
|
http://5starmediaworks.com/index.html ![]() ![]() ![]() ![]() Group: Members Posts: 3,371 Joined: 26-March 05 From: Ceres, California Member No.: 3,818 Region Association: Northern California ![]() |
1 for best acuracy it should be as up stream as possible
2 on a dead end it wont be acuate with out the constant exhaust flowing by mike |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 15th June 2024 - 07:25 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |