Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Want Mechanic Recommendation near Pasadena, CA
jrmole
post Sep 1 2008, 10:47 PM
Post #1


Torque is cool!
**

Group: Members
Posts: 93
Joined: 5-September 05
From: Los Angeles, CA area
Member No.: 4,752



Hi all,

Today, after three years of occasional weekend work, I spun my 914's new AC motor for the first time (with the back on jack stands). In theory, I could drive the car as soon as I re-register it and renew the insurance. It is only a theory because I live on a very steep hill.

As part of the conversion, I beefed up the suspension, replaced the tie-rods, went to 911 brakes up front, replaced the master cylinder with a 911 version and added a front swaybar. Since, the last work I did like this was in 1984 on a '53 MG TD, I would like my work reviewed by a professional before I drive it - in fact, I am quite happy to pay for a flat bed truck to get the car there.

So, I am looking for a mechanic near Pasadena, CA that will not be afraid of working with a car that has been significantly modified from stock. I would like them to:
  • Check out brakes (including rebleeding them and adjusting the e-brake)
  • Align the front tires
  • Adjust the sway bar
  • Adjust the clutch
  • Adjust the shift linkage
  • Adjust the torsion bars

The last couple of items I could do, but I am impatient to drive the car after all these years.

Any recommendations?

Thanks,

- Randy
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Heeltoe914
post Sep 2 2008, 06:15 PM
Post #2


Senior Member
***

Group: Members
Posts: 1,135
Joined: 31-January 06
From: Tujunga Calif,
Member No.: 5,506



How are you and welcome I am going to post this msg to you here so you can get feedback on me. The thing about conversation and custom work is that unless thay specialize in your type of car or the type of parts you have added or altered it can be as most often is more of a PITA than what is normally referred to as line work. (tune-ups, brake jobs, timing belts etc,). Conversations take a little more creativity than most will wont to bother with. TRE, OTTO’S, PRETECH are all great shops.
I happen to live near you and love working on the 914 as well as almost any sports car., but I am a high-end backyard mechanic lots of knowledge and have been around for years. I have helped many on this board and other board get and keep their cars running great or even getting them going after several years of sitting. Your project sounds like something that you and I can tackle with no problem. You are welcomed to stop by and talk to me so you have an idea of who I am. It would also be great if you bring some pixs, of your project.
As most around the So Cal area already know I am always open to talk cars so if you just wont to pick my little brain call/ Email me.


Attached image(s)
Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 16th June 2024 - 05:03 AM