 low oil preasure |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| honlude |
 Sep 15 2008, 05:38 PM
Post
#1
|
|
Newbie  Group: Members Posts: 23 Joined: 21-January 08 From: York Pa Member No.: 8,603 Region Association: MidAtlantic Region  |
Hello , Quick question , I have a 75 1.8 , start and runs good , after i drive for a while , maybe 30 min the oil preasure light come on at idle , i have a small leak at the one push rod tube , i did replace the sender about a month ago figuring it maybe the problem , any help would be great , (im running 5/30 oil )
(IMG:http://i39.photobucket.com/albums/e188/honlude/1aporsche.jpg) |
   |
 
|
  |
Replies
| Joe Bob |
Sep 16 2008, 11:01 AM
Post
#2
|
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
That involved a tear down and a rebuild.....at least on my Type I.
|
|
|
|
Posts in this topic
honlude low oil preasure Sep 15 2008, 05:38 PM
carr914 :wttc: What RPM is your idle?
T.C. Sep 15 2008, 05:42 PM r_towle run 20W50...
Rich Sep 15 2008, 05:43 PM Travis Neff I'm with Rich on this.. Sep 15 2008, 06:52 PM Cap'n Krusty Yup. 20w50 unless you're where it freezes on ... Sep 15 2008, 07:10 PM
r_towle
Yup. 20w50 unless you're where it freezes on... Sep 15 2008, 09:20 PM sww914 :agree:
The oil's too thin. Sep 15 2008, 07:10 PM SGB Also, I learned that the trip point is lower for t... Sep 16 2008, 07:22 AM honlude Thanks guys I'll try oil change first and see ... Sep 16 2008, 09:19 AM mikez "I" would run a straight weight oil. Al... Sep 16 2008, 10:30 AM Cap'n Krusty Or you could just fix it right ...................... Sep 16 2008, 10:59 AM honlude my plans are to tear motor out over winter and red... Sep 16 2008, 12:37 PM dbgriffith75
If your contact doesn't come thru for you le... Sep 16 2008, 03:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 01:29 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.