|
|

|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mikeyboy_85 |
Oct 12 2008, 07:11 AM
Post
#1
|
|
Member ![]() ![]() Group: Members Posts: 82 Joined: 24-May 07 From: australia Member No.: 7,758 |
Hey guys, the brake lines in my 914 are buldging so i need to get new lines, my car is fitted with 5 stud rotors and brakes from a 911(so im told) so im not sure what lines i need to get, and i also need to replace the linings and not sure which ones to get. The brakes look to be the same as an early 911 or 912 but not sure if i should get 914 lines or 914-6 lines due to 911 brakes??
cheers any help would be great! Michael |
![]() ![]() |
| Dave_Darling |
Oct 12 2008, 02:14 PM
Post
#2
|
|
914 Idiot ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 15,326 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California
|
I believe the 914 flex lines will not have the correct fitting on the caliper end. Likely the Six lines will, but I am not completely sure.
You can figure out which 911 brakes you have with a couple of tests. First, check the bolts that hold the caliper onto the strut. If they are 3" apart (center to center), you have "M" calipers, so the original 914-6 parts should be perfect. If you have 3.5" bolt spacing, then see if a magnet sticks to the caliper. If it does not, you have aluminum "S" calipers. If so, you have steel "A" calipers. I think the Six lines will work for those, but I could be wrong. Note that I haven't done this swap yet, so I am not talking from first-hand experience. --DD |
mikeyboy_85 What Brake lines to buy? Oct 12 2008, 07:11 AM
jimkelly post some pics and talk to eric shea
http://www.p... Oct 12 2008, 07:28 AM
mikeyboy_85 here are some pics of the front and rear brakes an... Oct 12 2008, 09:38 PM
mikeyboy_85 sorry bout bad pics, taken on phone Oct 12 2008, 09:40 PM
GeorgeRud Go with the same lines as you have. They should b... Oct 12 2008, 09:49 PM
mikeyboy_85 thanks mate! will get them from pelican parts Oct 12 2008, 10:22 PM
mikeyboy_85 can someome tell me what linings i would get for t... Oct 12 2008, 10:22 PM
Dave_Darling Those front hubs look like 911 parts to me! M... Oct 13 2008, 12:51 AM![]() ![]() |
|
Lo-Fi Version | Time is now: 7th March 2026 - 03:53 AM |
| All rights reserved 914World.com © since 2002 |
|
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |