 Clutch not disengaging, My pedal has gone soft |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| LetoAtreides |
 Oct 26 2008, 02:52 PM
Post
#1
|
|
Member  Group: Members Posts: 86 Joined: 15-May 07 From: Half Moon Bay, California Member No.: 7,739 Region Association: None  |
For some reason My clutch no longer fully disengages. The throw is adjusted properly (the adjustment is the same as I've always had it), but pushing the pedal only yields about 3/4 of an inch of movement from the clutch cable. Also, pushing the pedal is really easy now. What's wrong? Is the cable stretched?
|
   |
 
|
  |
Replies
| bam914 |
Oct 26 2008, 03:03 PM
Post
#2
|
|
Member Group: Members Posts: 334 Joined: 23-November 03 From: Atlanta, Ga Member No.: 1,378 Region Association: None |
Your clutch tube may have broken through the firewall or it broke loose from the welds inside the center tunnel. You will need to look in the tunnel on the left side and look for the tube moving.
|
|
|
|
Posts in this topic
LetoAtreides Clutch not disengaging Oct 26 2008, 02:52 PM
jsayre914 Lotsa stuff on this site to help,
http://www.914w... Oct 26 2008, 03:21 PM LetoAtreides How much would it be moving if it was broken, beca... Oct 26 2008, 03:27 PM
echocanyons check the clutch cable at the firewall, if it was ... Oct 26 2008, 04:49 PM cwpeden Just happened to a buddy of mine. The clip that h... Oct 27 2008, 12:55 AM Dave_Darling Did you recently replace the pedal bushings? If s... Oct 27 2008, 01:40 AM r_towle Take the rear access plate off of the inside tunne... Oct 27 2008, 10:34 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 11:45 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.