Overfilled Oil is my Front Seal Now trashed?, one quart more than capactiy, now leaks from front |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Overfilled Oil is my Front Seal Now trashed?, one quart more than capactiy, now leaks from front |
budman5201 |
Dec 7 2008, 11:53 PM
Post
#1
|
Senior Member Group: Members Posts: 595 Joined: 1-April 07 From: tempe, az Member No.: 7,635 |
I dropped my engine over the past week to fix misc oil leaks....oil cooler, front main seal, and the pushrod tubes. All leaked looked fixed but i accidentally overfilled oil by one quart. (drained oil while on ramps, and then refilled with 4 quarts) So i believe that there was one quart still i there when i refilled it 4 quarts on oil change. The dipstick measured 1 quart overfilled when checked.
I only ran it 5 minutes on ramps to get it up to temperature to make sure everything was allright then shut off. The front main seal (looks like from the leak up front dripping from front of fan shroud) like it is leaking. It has a brand new front main seal, IS it TRASHED now? Of am i just seeing the left over oil from the initial overfill thats still in the fan shrould? It now measures EXACTLY right below top notch on dipstick, maybe a hair below.... It leaks still front front of engine, not as fast, but drips a lot. |
Cap'n Krusty |
Dec 8 2008, 09:43 AM
Post
#2
|
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
Overfilled? I've ALWAYS used 4 quarts with an oil change. Of course, I always change the filter, too, and clean the sump screen. Did you remember to replace the o-ring on the crankshaft, the one under the fan hub? Did you clean the taper on the snout of the crank and on the inside of the hub and make sure the woodruff key was in there? Did you oil both the inside and the OUTSIDE of the seal and make sure it went in evenly?
The Cap'n |
Lo-Fi Version | Time is now: 16th June 2024 - 03:06 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |