Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Overfilled Oil is my Front Seal Now trashed?, one quart more than capactiy, now leaks from front
budman5201
post Dec 7 2008, 11:53 PM
Post #1


Senior Member
***

Group: Members
Posts: 595
Joined: 1-April 07
From: tempe, az
Member No.: 7,635



I dropped my engine over the past week to fix misc oil leaks....oil cooler, front main seal, and the pushrod tubes. All leaked looked fixed but i accidentally overfilled oil by one quart. (drained oil while on ramps, and then refilled with 4 quarts) So i believe that there was one quart still i there when i refilled it 4 quarts on oil change. The dipstick measured 1 quart overfilled when checked.

I only ran it 5 minutes on ramps to get it up to temperature to make sure everything was allright then shut off.

The front main seal (looks like from the leak up front dripping from front of fan shroud) like it is leaking.

It has a brand new front main seal, IS it TRASHED now? Of am i just seeing the left over oil from the initial overfill thats still in the fan shrould?

It now measures EXACTLY right below top notch on dipstick, maybe a hair below....

It leaks still front front of engine, not as fast, but drips a lot.

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Al Meredith
post Dec 8 2008, 05:09 PM
Post #2


Senior Member
***

Group: Members
Posts: 961
Joined: 4-November 04
From: Atlanta, ga
Member No.: 3,061



The "O" ring the Cap'n mentioned is often overlooked I have taken apart many engines that are missing that "O" ring
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
budman5201
post Dec 8 2008, 05:29 PM
Post #3


Senior Member
***

Group: Members
Posts: 595
Joined: 1-April 07
From: tempe, az
Member No.: 7,635



QUOTE(Al Meredith @ Dec 8 2008, 04:09 PM) *

The "O" ring the Cap'n mentioned is often overlooked I have taken apart many engines that are missing that "O" ring


OMG WHAT o RING????

Shhhh----t!


OKAY how much oil would leak if i forgot to put that back?? ARRRRGGH and can i somehow pull the front off without pulling the engine again???


well thankyou guys i appreciate it.....!!!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 16th June 2024 - 09:07 AM