 Continuing Work on My 914 EZ30R Twin Turbo Conversion, 1/31/12, nothing new just started working on the car again pic will follow |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| TwinTurbo914 |
 Jun 13 2008, 11:21 AM
Post
#1
|
|
Member  Group: Members Posts: 73 Joined: 29-May 03 From: NorCal Member No.: 752 Region Association: Northern California  |
Well its still subaru powered, but ive made the swap over to the EZ30R H6 3.0 Subaru motor Read on
Hey Guys I finally got some time and the motivation to start working on my project car again. I started it a few years ago but, got side tracked on a few other project but I have decided to come back to it and finish it. I all started 3-4 years ago when i got my first subaru wrx and decided i loved the power plant and thought what better way to add a lot of power to a light car. So i started with getting a twin turbo ej20 subaru engine from japan. I also bought the kennedy engineering adapter kit. I worked on the car for awhile, then got busy working on other project and kind of abanoned it. But no im back working on it about 5 nights a week. But lucky I did take a break from it cause i decided to make to big changes to the car( since i can afford them now. Im going to use the stock subaru trans, with a bremar 2wd kit. Im going to use big brakes all the way around, i have some big reds for the front, and im goin to do the rear also. Car is getting a full cage, and all longs and suspension pickups are going to be plated and reinforced. And i decided to swap over to the single turbo set up for simplicity of tuning, and more maximum power output. ( im eventually swaping in a built 2.5 STI engine) So i thought id start a thread to show my progress on my car, and will glady answer any questions along the way if anyone is looking to do a similar swap. Seems like the subaru conversion has gained a lot of popularity since i started my project quiet awhile ago. Started working on it about one and a half weeks ago, and so far got my interior stripped out, and gonna pick up my material for my cage next week. I got my transmission mounts fabricated, and my engine mount fabricated, and now im working on reinforcing the shock tower and such where my engine mount attaches to. Here's some picks of my progress hope you all enjoy (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269359998.1.jpg) Here the engine sitting in the car (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269359999.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360000.3.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360000.4.jpg) Transmission mounts, there not done yet still gotta cap all the ends on them and powder coat them and such (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360001.5.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360001.6.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360002.7.jpg)My exhasut header and big uppipe (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360002.8.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360004.9.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360004.10.jpg) Engine mount ill show some pics of it installed later its out right now as im tig welding it up right now (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360005.11.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360005.12.jpg) My stripped out interior, getting ready to prep it to plate the longs and start my cage (IMG:http://www.914world.com/bbs2/uploads_offsite/img.photobucket.com-752-1269360006.13.jpg) |
   |
 
|
  |
Replies
| kylehall21 |
Jun 27 2008, 10:16 PM
Post
#2
|
|
Newbie Group: Members Posts: 15 Joined: 22-July 06 From: Claremont, Ca Member No.: 6,485 |
Any twin turbo parts that you want to get rid of? I got a jdm motor as well but I'm missing parts .....
|
|
|
|
| TwinTurbo914 |
Jul 7 2008, 05:51 PM
Post
#3
|
|
Member Group: Members Posts: 73 Joined: 29-May 03 From: NorCal Member No.: 752 Region Association: Northern California |
QUOTE(kylehall21 @ Jun 27 2008, 09:16 PM)  Any twin turbo parts that you want to get rid of? I got a jdm motor as well but I'm missing parts ..... Sorry no Parts, they are all long gone. I sold the whole turbo set up, the twin turbo setup is know to have an inherant dead spot when the second turbo comes in at about 3500rpm. Swap over to a single turbo, much easier for future tuning (like a larger turbo) and easier engine packaging clearance wise. Let me know if you need any parts for a single turbo system i got some stuff laying around. I have been hard at work on my car, i got the whole interior stripped out, and all the floor insulation pulled up. And i got a chassis strenghtening kit, and i punched all the holes in the pieces good thing i had a sheet metal hole puncher ( I hate drilling holes LOL). So this week im gonna soda blast the complete interior of the car to have it all nice and clean and to bare metal for when i make all the plating for the longs. And im gonna soda blast my inner fender wells and my engine compartment. Ill get some new pics up in the next day or so of my progress so far |
|
|
|
| TwinTurbo914 |
Jan 8 2009, 10:48 AM
Post
#4
|
|
Member Group: Members Posts: 73 Joined: 29-May 03 From: NorCal Member No.: 752 Region Association: Northern California |
Well i have not given any updates lately as things have just been crazy lately, work has been very busy and i moved into a new house, but i have been working on the car off and on as i get time. I have basically all the plating made up for the interior of the car for the longs, so i just have to soda blast the interior and drill all the holes in my plating and weld everything in, then i can move on to the next part of the project.
I have made a Major decision to change the power plant Slightly on my project. Im Gonna sell the subie 4 cyl, and im gonna buy a EZ30R subie Six Cylinder. They are a 3.0 flat six, and its only 1.5" longer than the subie four, plus they have variable valve timing and variable valve lift and there 250HP stock N/A. So More Cubes, and more of that porsche sound. Oh and its still gonna be turbo charged possibly twin turbo. (IMG:style_emoticons/default/biggrin.gif). Ill update soon with some pics, as everything has calmed down and im able to work on the car a few nights a week now. Stay tuned more to come |
|
|
|
| ONTHEGRIND |
Jan 8 2009, 11:33 AM
Post
#5
|
|
Member Group: Members Posts: 286 Joined: 10-November 08 From: California Member No.: 9,738 Region Association: None |
QUOTE(TwinTurbo914 @ Jan 8 2009, 08:48 AM) Well i have not given any updates lately as things have just been crazy lately, work has been very busy and i moved into a new house, but i have been working on the car off and on as i get time. I have basically all the plating made up for the interior of the car for the longs, so i just have to soda blast the interior and drill all the holes in my plating and weld everything in, then i can move on to the next part of the project. I have made a Major decision to change the power plant Slightly on my project. Im Gonna sell the subie 4 cyl, and im gonna buy a EZ30R subie Six Cylinder. They are a 3.0 flat six, and its only 1.5" longer than the subie four, plus they have variable valve timing and variable valve lift and there 250HP stock N/A. So More Cubes, and more of that porsche sound. Oh and its still gonna be turbo charged possibly twin turbo. (IMG:style_emoticons/default/biggrin.gif). Ill update soon with some pics, as everything has calmed down and im able to work on the car a few nights a week now. Stay tuned more to come LOOKIN GOOD.. I just did a top end for a Subie, I dream a a 4 valve turbo aircooled 914.. (IMG:http://img.photobucket.com/albums/v236/xr8ted/100_2049.jpg) |
|
|
|
| EVILGENIUS13 |
Jan 9 2009, 03:56 AM
Post
#6
|
|
Newbie Group: Members Posts: 6 Joined: 30-October 07 From: 8000 BLOCK Member No.: 8,279 |
QUOTE(ONTHEGRIND @ Jan 8 2009, 09:33 AM) QUOTE(TwinTurbo914 @ Jan 8 2009, 08:48 AM) Well i have not given any updates lately as things have just been crazy lately, work has been very busy and i moved into a new house, but i have been working on the car off and on as i get time. I have basically all the plating made up for the interior of the car for the longs, so i just have to soda blast the interior and drill all the holes in my plating and weld everything in, then i can move on to the next part of the project. I have made a Major decision to change the power plant Slightly on my project. Im Gonna sell the subie 4 cyl, and im gonna buy a EZ30R subie Six Cylinder. They are a 3.0 flat six, and its only 1.5" longer than the subie four, plus they have variable valve timing and variable valve lift and there 250HP stock N/A. So More Cubes, and more of that porsche sound. Oh and its still gonna be turbo charged possibly twin turbo. (IMG:style_emoticons/default/biggrin.gif). Ill update soon with some pics, as everything has calmed down and im able to work on the car a few nights a week now. Stay tuned more to come LOOKIN GOOD.. I just did a top end for a Subie, I dream a a 4 valve turbo aircooled 914.. (IMG:http://img.photobucket.com/albums/v236/xr8ted/100_2049.jpg) Some guys in australia have put subie heads on type 1 and type 4's. The bore centers are the same. |
|
|
|
Posts in this topic
TwinTurbo914 Continuing Work on My 914 EZ30R Twin Turbo Conversion Jun 13 2008, 11:21 AM
jd74914 Very cool. Keep us posted on your prgress. :) Jun 15 2008, 08:02 PM scotty914 that engine mount design looks like i have seen it... Jun 15 2008, 09:18 PM
rick 918-S
that engine mount design looks like i have seen i... Jun 15 2008, 10:48 PM TwinTurbo914 Yah Im going to sleeve and cap everything when im ... Jun 16 2008, 01:15 PM rick 918-S :popcorn: :headbanger: Jun 16 2008, 09:16 PM TwinTurbo914 Well I worked on cleaning up in the shop a little ... Jan 12 2009, 10:51 AM TwinTurbo914 Well i have Been working away at the car when ever... Jan 13 2009, 11:10 AM quadracerx [b]DUDE....your like liv'in the dream...LOL :D... Jan 13 2009, 09:34 PM charliew Put the suby in that Izetta? isetta? Jan 13 2009, 09:46 PM turnaround89 Nice work. Very cool, wish my hell hole looked li... Jan 13 2009, 10:02 PM ChrisNPDrider Yes, that trunk section braces between shock tower... Jan 13 2009, 10:13 PM TwinTurbo914
[b]DUDE....your like liv'in the dream...LOL :... Jan 14 2009, 10:33 AM TwinTurbo914
Nice work. Very cool, wish my hell hole looked l... Jan 14 2009, 10:44 AM charliew Do you know about the suby to bus adapters from po... Jan 14 2009, 12:36 PM TwinTurbo914
Do you know about the suby to bus adapters from p... Jan 14 2009, 01:33 PM TwinTurbo914 Im making good progress on the interior reinforcem... Jan 22 2009, 06:40 PM jd74914
Im making good progress on the interior reinforce... Jan 22 2009, 10:08 PM cymaster007 What do you have planned for your radiator/cooling... Jan 22 2009, 08:43 PM TwinTurbo914
What do you have planned for your radiator/coolin... Jan 23 2009, 10:40 AM TwinTurbo914 Well Im still plugging away at the car, the inter... Jan 29 2009, 10:38 AM TwinTurbo914 Hey everyone sorry for no updates, but I haven... Mar 3 2009, 02:58 PM MZM Happy for you that you have a growing business the... Apr 5 2009, 11:56 PM Zaney I vote for an EZ36 too! I believe they are ro... Apr 6 2009, 10:08 AM TwinTurbo914 From the research i've done the ez36 has offse... Apr 6 2009, 01:21 PM charliew If I where you I would check on the axle adapters. Apr 7 2009, 12:25 PM TwinTurbo914 Finally got to work on the car a little bit this w... May 4 2009, 01:18 PM TwinTurbo914 Sorry for being so slow on updating on the progres... Jun 29 2009, 11:16 AM TwinTurbo914 Well i have been making some progress on the car, ... Jul 13 2009, 03:04 PM gopack soOOOO very cool! keep it up and you may insp... Jul 13 2009, 03:21 PM RiqueMar Haha, weird. We are both 914 owners. We both live ... Jul 13 2009, 05:15 PM TwinTurbo914 Both of our car are orange also LOL
Haha, weird.... Jul 13 2009, 05:34 PM ghuff This should turn out to be a lot of fun. Sheetmeta... Jul 13 2009, 06:10 PM TwinTurbo914 Well here as promised, a little late the never are... Jul 14 2009, 10:31 AM TwinTurbo914 Well im slowly making progress, here a few pics fr... Aug 11 2009, 11:29 AM charliew Boy you trust the tranny crossmember way more than... Aug 13 2009, 12:16 AM TwinTurbo914
Boy you trust the tranny crossmember way more tha... Aug 17 2009, 01:13 PM Numbchux very cool! what do you plan to run for managem... Sep 4 2009, 12:19 AM TwinTurbo914
very cool! what do you plan to run for manage... Sep 4 2009, 10:59 AM Numbchux
[quote name='Numbchux' post='1210763' date='Sep 3... Sep 4 2009, 09:54 PM budman5201
[quote name='Numbchux' post='1210763' date='Sep ... Sep 13 2009, 12:24 PM Numbchux
Yep I have a comlink. Can you take a picture of y... Sep 13 2009, 03:11 PM TwinTurbo914 Well not to much new going on still plugging away ... Sep 28 2009, 01:46 PM budman5201
very cool! what do you plan to run for manage... Sep 4 2009, 02:49 PM TwinTurbo914 NOPE I can get you a Link for $1100 shipped t... Sep 4 2009, 03:07 PM budman5201
NOPE I can get you a Link for $1100 shipped ... Sep 4 2009, 05:25 PM DBCooper I think the base G4 box only has four ignition dri... Sep 4 2009, 03:26 PM TwinTurbo914 Haven't done a ton of research on the G4 but I... Sep 4 2009, 04:06 PM charliew I will follow this my son and I are looking at sta... Sep 12 2009, 10:21 AM budman5201
I will follow this my son and I are looking at st... Mar 26 2010, 12:30 PM TwinTurbo914
I will follow this my son and I are looking at s... Mar 29 2010, 10:02 AM jd74914
I will follow this my son and I are looking at s... Mar 29 2010, 03:24 PM TwinTurbo914 Well started on the Rollcage this last weekend and... Oct 14 2009, 10:57 AM TwinTurbo914 Well Great news today, I finally got my engine. ... Dec 7 2009, 11:24 AM TwinTurbo914 Well Finally Got the engine out of my truck yester... Dec 9 2009, 10:45 AM strawman Sweet, a big block Suby!
I'm kinda surpri... Dec 10 2009, 12:13 AM charliew It might just be a different motormount. Did you t... Dec 10 2009, 10:08 AM TwinTurbo914
It might just be a different motormount. Did you ... Dec 10 2009, 10:23 AM charliew I'm sure you are using solid mounts to avoid m... Dec 10 2009, 11:09 AM budman5201 Oh hey that shiney header you have on your ej20 lo... Dec 10 2009, 10:51 PM TwinTurbo914
Oh hey that shiney header you have on your ej20 l... Dec 11 2009, 10:36 AM Heater Guy Looks good! Keep going.
Hope to have mine at ... Feb 24 2010, 03:38 PM number6
Looks good! Keep going.
Hope to have mine at... Feb 24 2010, 04:31 PM quikshft First post in this forum guys, this is an interest... Feb 27 2010, 04:10 AM TwinTurbo914 Still Working on the car, but progress has been ex... Mar 4 2010, 12:11 PM quikshft
Still Working on the car, but progress has been e... Mar 23 2010, 01:55 PM TwinTurbo914 Well finally found some time to put into the car, ... Mar 23 2010, 09:52 AM Zardozz Now I haven't eaten lunch yet so I might be a ... Mar 23 2010, 03:50 PM TwinTurbo914
Now I haven't eaten lunch yet so I might be a... Mar 23 2010, 04:59 PM Zardozz
Yah there is 3 bolts on each side that bolt to th... Mar 23 2010, 06:11 PM strawman Great work! Are you solid-mounting the engine/... Mar 23 2010, 05:11 PM TwinTurbo914
Great work! Are you solid-mounting the engine... Mar 23 2010, 07:12 PM quadracerx
Great work! Are you solid-mounting the engin... Mar 25 2010, 06:25 PM TwinTurbo914
What kind of tubing did you use....Mild Steel or... Mar 26 2010, 09:36 AM Frost Man that looks good, that is some nice engine mou... Mar 25 2010, 04:30 PM effutuo101 very nice! Mar 25 2010, 05:43 PM budman5201 Hey what computer are you using? I just picked up ... Mar 26 2010, 11:53 AM budman5201 Does anyone have a already completed map for the E... Mar 29 2010, 06:28 PM DBCooper There's an Australian shop, one of the Link pe... Mar 29 2010, 09:48 PM budman5201
There's an Australian shop, one of the Link p... Mar 29 2010, 11:21 PM DBCooper It's Dave at D-Tech, dave@dtechmotorsport.com,... Mar 30 2010, 09:17 AM TwinTurbo914 I talked with Link last year at the sema show, an... Mar 30 2010, 09:29 AM budman5201 wow, thankyou guys for that info. I looked forever... Mar 30 2010, 04:11 PM TwinTurbo914 Not much of an update but, I haven't had much ... May 12 2010, 12:07 PM TwinTurbo914 Well Cliff over at Turbo Power in Cameron Park cam... Jun 3 2010, 03:02 PM charliew So you eliminated the wastegate. How does this com... Jun 4 2010, 08:41 AM TwinTurbo914 These were not internal gated housings, and these ... Jun 4 2010, 09:34 AM charliew You might want to make the jig a permanent fixture... Jun 4 2010, 09:38 AM Zardozz That's what I call turbo porn...
I need a mo... Jun 4 2010, 06:05 PM Andyrew What size turbo's? Vband flange, Nice!
I ... Jun 4 2010, 06:27 PM TwinTurbo914 I got the turbo's mocked up in the engine bay ... Jun 7 2010, 09:35 AM ClayPerrine Now those are some gutless turbos!!! ... Jun 7 2010, 11:35 AM TwinTurbo914 As promised here are some pics of the progress, o... Jun 8 2010, 09:44 AM TwinTurbo914 I got a lot of work done on the car this weekend, ... Jun 14 2010, 09:48 AM TwinTurbo914 Here's a few pics of all the hot side plumbing... Jun 21 2010, 06:48 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 14th December 2025 - 12:02 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.