 Aftermarket ABS, Possible??? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| r_towle |
 Jan 27 2009, 09:56 PM
Post
#1
|
|
Custom Member  Group: Members Posts: 24,588 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
 |
ABS (at least on my Volvo) is an independant ECU.
It relies upon four hall sensors, one on each wheel. Assuming the Hall sensors can be mounted properly and can be made to affectively send a signal, is there an aftermarket ECU system specifically for ABS brakes? Rich |
   |
 
|
  |
Replies
| banger |
Jan 29 2009, 04:38 AM
Post
#2
|
|
Member Group: Members Posts: 354 Joined: 12-November 06 From: Santa Clarita Member No.: 7,205 Region Association: Southern California |
Most of the VW and Audi abs systems have the ecu built into the back of the pump. Basically you would need the abs pump unit, sensors and wiring harness. It shouldnt be too expensive to pick up a used unit.
|
|
|
|
Posts in this topic
r_towle Aftermarket ABS Jan 27 2009, 09:56 PM
McMark You need the ABS 'pump' and electric valve... Jan 27 2009, 10:04 PM
r_towle
You need the ABS 'pump' and electric valv... Jan 28 2009, 03:08 PM sww914 I'd be concerned about finding room for the tr... Jan 28 2009, 11:41 AM turnaround89 You must do a lot of driving in the snow to want A... Jan 28 2009, 12:23 PM jhadler
You must do a lot of driving in the snow to want ... Jan 28 2009, 12:40 PM ArtechnikA
If it wasn't a competitive advantage, why wou... Jan 29 2009, 06:27 AM J P Stein Bosch sells a set up for about 6-7K
http://www.bo... Jan 28 2009, 12:50 PM turnaround89 ABS would give an advantage in autox, but aren... Jan 28 2009, 02:43 PM Joe Ricard If it wasn't an advantage then most rule books... Jan 28 2009, 03:15 PM type11969 Is there a megasquirt type diy ecu for ABS? It wou... Jan 28 2009, 03:20 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 01:08 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.