 Separating the CV/Axle from the Rear Hub, It's a Learning Moment...and I'm listening |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bandjoey |
 Apr 20 2009, 10:16 AM
Post
#1
|
|
bandjoey  Group: Members Posts: 4,926 Joined: 26-September 07 From: Bedford Tx Member No.: 8,156 Region Association: Southwest Region  |
How in the heck do you separate the CV from the Hub on the rear swing arm, and pull out the axle. I've pounded, panted, and pulled and it won't break free! (IMG:style_emoticons/default/headbang.gif) Thanks for the help. Bill
|
   |
 
|
  |
Replies
| 914rat |
Apr 20 2009, 05:02 PM
Post
#2
|
|
Member Group: Members Posts: 279 Joined: 3-July 06 From: Maryland Member No.: 6,362 |
Remove the castle nut and cotter pin.The stub axle is splined and has a indentation for a punch to fit in, spray the splined area with PB Blaster let it sit for about a half hour and spray it again.Use a large punch that fits the hole on the stub axle and take a 12# sledge and it will jump right out.
|
|
|
|
| Cap'n Krusty |
Apr 20 2009, 05:41 PM
Post
#3
|
|
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
QUOTE(914rat @ Apr 20 2009, 04:02 PM)  Remove the castle nut and cotter pin.The stub axle is splined and has a indentation for a punch to fit in, spray the splined area with PB Blaster let it sit for about a half hour and spray it again.Use a large punch that fits the hole on the stub axle and take a 12# sledge and it will jump right out. That hole is for the center on a lathe. I've seen axles mushroomed by using it as a place to put your drift. The inverting the nut trick is better. The Cap'n |
|
|
|
Posts in this topic
bandjoey Separating the CV/Axle from the Rear Hub Apr 20 2009, 10:16 AM
davep Have you removed the axle? Do that first.
remove t... Apr 20 2009, 10:20 AM bandjoey Thanks. Sounds like I've been pounding on the... Apr 20 2009, 10:22 AM
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 05:07 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.