 a short steering coupler, for those with steering rack spacers |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Wes V |
 Apr 29 2009, 08:58 PM
Post
#1
|
|
Member  Group: Members Posts: 482 Joined: 11-October 07 From: Los angeles Member No.: 8,211  |
I thought you guys out there with steering rack spacers would find this interesting.
If you space the rack higher, you should think about having a steering coupler (that rubber bisket) that is shorter. That was the situation I was in and went looking for options. One is that on the "other" 914 site there is a guy that makes billet units that are the correct height. However I feel there are a couple reasons to retain something rubber. After doing the math, I wanted a coupler that is 1 1/16" thick. (the stock one is about 1.33" high) Now I've got to admit that what I came up with isn't totally an original idea. The site "nlaparts.com" sells a coupler for the 356C that's pretty much the same, but made to match the height of the original 356C coupler. What I came up with is to use two early VW steering couplers. This gives a combined height of 1". They are only about $11.00 each. The original 914 bolts are a little long, but could have been used. I purchased new 8mmx1.25x35 grade 8.8 (the original bolts are grade 8.8). I've also ordered from Pelican new lock tabs (not shown in the photos). So, here are the photos; (IMG:http://www.performanceforum.com/wesvann/914a/SC1.JPG) (IMG:http://www.performanceforum.com/wesvann/914a/SC2.JPG) (IMG:http://www.performanceforum.com/wesvann/914a/SC3.JPG) (IMG:http://www.performanceforum.com/wesvann/914a/SC4.JPG) The only thing that would make it better is if somebody with a lath made up the steel collars to the correct length (1"). (Racer Chris has a lath! hint, hint) Wes Vann |
   |
 
|
  |
Replies
| r_towle |
Apr 30 2009, 05:50 AM
Post
#2
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
Ever measure a hockey puck???
BTDT, it works like a charm...just drill out for the bolts, recycle the steel tubing (after you grind it down) and you get a 3 dollar spacer that fits tight. Rich |
|
|
|
| Wes V |
Apr 30 2009, 08:09 AM
Post
#3
|
|
Member Group: Members Posts: 482 Joined: 11-October 07 From: Los angeles Member No.: 8,211 |
QUOTE(r_towle @ Apr 30 2009, 04:50 AM)  Ever measure a hockey puck??? Rich This may sound like I'm being a smart ass (but in this case, I'm not); No. I've never actually seen a hockey puck. I've heard of people using them for motor mounts and such. And yet, I've never really seen one. Do they come in different hardness's? Just another thing to research. Now I'm off to Big 5 Sporting Goods for Porsche parts. Wes |
|
|
|
Posts in this topic
Wes V a short steering coupler Apr 29 2009, 08:58 PM
jaxdream Make sence , I have the turbo tie rods and the spa... Apr 29 2009, 09:46 PM jd74914 Very cool Wes.
That seems like a much better sol... Apr 29 2009, 10:34 PM
brp986s Doesn't the oem biscuit have a metal cylindric... Apr 30 2009, 09:12 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 02:10 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.