2.0 Fuel Injectors, Got stiffed on used what about these? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
2.0 Fuel Injectors, Got stiffed on used what about these? |
tracks914 |
Jun 14 2009, 07:14 PM
Post
#1
|
Canadian Member Group: Benefactors Posts: 2,083 Joined: 15-January 03 From: Timmins, Ontario, Canada Member No.: 153 Region Association: None |
I bought 4 "good used 2.0 injectors" from a member on this site last winter. Yesterday I went to test them before installing them and found 1 out of 4 worked. The others are seized tight.
I think I will buy new ones and saw these on EBay. 912 2.0 and these 1.8 or 2.0 ??? or these AA Pythons Have any of you bought these and tried them? Where would you recommend?? |
r_towle |
Jun 14 2009, 08:31 PM
Post
#2
|
Custom Member Group: Members Posts: 24,586 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
Injectors do that sometimes.
Before you get mad...or spendalot of money.. Buy a quart of TEKTRON FI cleaner...nothing else. Dunk all four injectors for a few days. How are you testing them? What voltage? RIch |
jim_hoyland |
Jun 14 2009, 08:36 PM
Post
#3
|
Get that VIN ? Group: Members Posts: 9,317 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California |
Injectors do that sometimes. Before you get mad...or spendalot of money.. Buy a quart of TEKTRON FI cleaner...nothing else. Dunk all four injectors for a few days. How are you testing them? What voltage? RIch Is there a simple bench-test for injectors ? I have 6 1.8 FI I bought at a swap meet along with a working Fuel Pump. |
r_towle |
Jun 14 2009, 08:39 PM
Post
#4
|
Custom Member Group: Members Posts: 24,586 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
Injectors do that sometimes. Before you get mad...or spendalot of money.. Buy a quart of TEKTRON FI cleaner...nothing else. Dunk all four injectors for a few days. How are you testing them? What voltage? RIch Is there a simple bench-test for injectors ? I have 6 1.8 FI I bought at a swap meet along with a working Fuel Pump. I am sure someone will jump in the proper voltage, but a 9volt transistor battery works...that lets you hear the click. Then you need fuel to check and see if they spray and/or leak. Rich |
jim_hoyland |
Jun 14 2009, 09:36 PM
Post
#5
|
Get that VIN ? Group: Members Posts: 9,317 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California |
QUOTE QUOTE Is there a simple bench-test for injectors ? I have 6 1.8 FI I bought at a swap meet along with a working Fuel Pump. I am sure someone will jump in the proper voltage, but a 9volt transistor battery works...that lets you hear the click.Then you need fuel to check and see if they spray and/or leak. Rich Let me see if I got this right: Hook up the FI directly to the FP, then used a 9volt battery to trigger the FI. Will the FI spray s long as the battery is attached ? |
r_towle |
Jun 14 2009, 10:15 PM
Post
#6
|
Custom Member Group: Members Posts: 24,586 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
QUOTE QUOTE Is there a simple bench-test for injectors ? I have 6 1.8 FI I bought at a swap meet along with a working Fuel Pump. I am sure someone will jump in the proper voltage, but a 9volt transistor battery works...that lets you hear the click.Then you need fuel to check and see if they spray and/or leak. Rich Let me see if I got this right: Hook up the FI directly to the FP, then used a 9volt battery to trigger the FI. Will the FI spray s long as the battery is attached ? its an electrical coil...or elec magnet. Apply voltage..it opens or closes...depending. So, you can open them and blast cleaning fluid through them to fix the spray pattern...again..I am not certain about the voltage...I do know its less than 12VDC and fromwhat I recall 12vdc will harm the injector. Start with an AA battery...1.5 volts...work your way up one battery at a time. Rich |
Lo-Fi Version | Time is now: 6th June 2024 - 05:33 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |