Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> No turn signals!
silverteener
post Jun 28 2009, 02:13 PM
Post #1


Member
**

Group: Members
Posts: 214
Joined: 9-August 05
From: East Moline, IL
Member No.: 4,566





I've been having this issue with my turn signals. Sometimes they would work and sometimes they didn't (IMG:style_emoticons/default/confused24.gif) I thought maybe it was the switch so I swapped it out with another one I have but it didn't help. Actually they don't work at all now. I cleaned the metal on the steering wheel that contacts the turn signal switch. I checked my fuses and they are all good. I did notice that if I had the turn signal on with the key on the side marker light will stay on. Any suggestions on what to do next. I'm at a loss!

thanks

Scott
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
silverteener
post Jul 5 2009, 02:38 PM
Post #2


Member
**

Group: Members
Posts: 214
Joined: 9-August 05
From: East Moline, IL
Member No.: 4,566



I'm still trying to get this figured out. I found this yellow and red wire that came out of the plug that connects to the turn signal switch under the dash. Could this be my problem (IMG:style_emoticons/default/confused24.gif) all the other wires were firmly connected.

thanks

Scott
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
904svo
post Jul 5 2009, 02:59 PM
Post #3


904SVO
***

Group: Members
Posts: 1,127
Joined: 17-November 05
From: Woodstock,Georgia
Member No.: 5,146



QUOTE(silverteener @ Jul 5 2009, 12:38 PM) *

I'm still trying to get this figured out. I found this yellow and red wire that came out of the plug that connects to the turn signal switch under the dash. Could this be my problem (IMG:style_emoticons/default/confused24.gif) all the other wires were firmly connected.

thanks

Scott


Yellow/red is used for turn on the high beams.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 1st August 2025 - 06:45 PM