 Preventing flash rust without spraying two part epoxy primer?, There has to be a way! Metal ready is not it! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ghuff |
 Aug 14 2009, 01:44 PM
Post
#1
|
|
This is certainly not what I expected down here.  Group: Members Posts: 849 Joined: 21-May 09 From: Bodymore Murderland Member No.: 10,389 Region Association: MidAtlantic Region  |
So.... POR 15 metal ready sucks at preventing flash rust. Even in a garage that is ok at sealing.
Spraying a two part epoxy primer is out, and my pans are going to be bare metal for a while since I have to remove the cross brace in the pan and the center tunnel to attack the rust in there. Is epoxy primer available in cans? I need to prevent the metal from flashing and rusting agian while this is done so I can do it all with por 15 excepting the area where the brace/center tunnel mates with the pan, which of course will be weld through primer. Also any reccomendations on a good weld through primer? U-pol I hear is the best and worth every penny vs 3m or the others? Thoughts? |
   |
 
|
  |
Replies
| d914 |
Aug 15 2009, 01:31 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,331 Joined: 12-July 03 From: Atlanta, ga Member No.: 904 Region Association: South East States |
lowes has a degreaser rust inhibitor(sp) just wipe the car down.. Mine has been bare metal for a long time...first the soda blast helpped then I sanded down the flash rust and used it..any time I handle the car (touch it) just re wipe it.. from Crown...
Got some better stuff from the paint store once I get serious.. |
|
|
|
Posts in this topic
ghuff Preventing flash rust without spraying two part epoxy primer? Aug 14 2009, 01:44 PM
ghuff Forgot to add, I picked up two cans of rustoleum c... Aug 14 2009, 01:48 PM FourBlades I used the cold galvanizing compound where I was g... Aug 14 2009, 06:53 PM
ghuff
I used the cold galvanizing compound where I was ... Aug 14 2009, 10:28 PM r_towle WD40
Seriously
Prior to painting you will need to... Aug 14 2009, 06:59 PM iamchappy i've never used this but sounds interesting.
... Aug 14 2009, 07:56 PM Vacca Rabite My tub sat as bare metal for 4 months. Granted th... Aug 14 2009, 08:28 PM dlestep ...Phospho is an acid prep that has to be neutrali... Aug 14 2009, 09:01 PM ghuff
...Phospho is an acid prep that has to be neutral... Aug 14 2009, 10:34 PM rick 918-S I have a friend that makes cars. Really he is a me... Aug 14 2009, 11:21 PM r_towle
I have a friend that makes cars. Really he is a m... Aug 15 2009, 09:31 AM kwales Zinc can be difficult to get paint to stick to. I... Aug 15 2009, 11:58 AM bandjoey Mixed Metal REady double streighth in a hand held ... Aug 15 2009, 11:17 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 06:06 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.