Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Lighting Woooes - Electrical Genius Needed, What's the next step? ??
bandjoey
post Aug 20 2009, 11:16 PM
Post #1


bandjoey
****

Group: Members
Posts: 4,929
Joined: 26-September 07
From: Bedford Tx
Member No.: 8,156
Region Association: Southwest Region



???????? (IMG:style_emoticons/default/headbang.gif)

Rear Light Bulbs Numbered Outside to Inside, 4 Being the Backup Light
1234 4321
Front Marker is A
Front Turn/Flasher is B


______Flashers On_______________
Front Left A & B only Nothing on Right side front
Rear Left 2 Right 2
_________________________
________________________
Ignition Switch OFF or ON with head light switch pulled full out:
Front Left A & B only. Nothing on Right Side Front
Rear Left 1 & 3, Right Side Nothing
_________________________
_______________________
Brake Pedal Depressed Switch OFF Nothing:
Brake Pedal Depressed Switch ON:
Left 3 & Right 3
_________________________
________________

No Turn Signals on Any Corner
_________________________
________________
Bulbs Replaced and contacts - grounds sanded cleaned at each bulb
Pulled Hazard Switch in and out a dozed times per Haynes
New Fuse Set per Specs
Interior light and Trunk light work just right
License Plate Lights work just right
Hi/Lo beams work just right

What else do you need to know?
Thanks Bill
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
bandjoey
post Aug 23 2009, 12:02 AM
Post #2


bandjoey
****

Group: Members
Posts: 4,929
Joined: 26-September 07
From: Bedford Tx
Member No.: 8,156
Region Association: Southwest Region



Thanks. Good info. Also bought a turn signal relay to install tomorrow. Since all of the right side is dead it must go to one central ground spot. Adjusting valves today so I cleaned the ground strap good at the trunk, what about the top of the tranny? Does it need to come off and be cleaned too? Let you know after a day of brown wire cleaning.
?? does electrical contact cleaner suffffiiiice or do I need to sandpaper the connections? Or both? Bill
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 16th June 2024 - 07:04 AM