Still no turn signals Options

[silverteener]

We'll..

I got another hazard switch today and still have no turn signals. I have replaced the turn signal lever and put a new relay in. I also checked the light bulbs and they are 1157's. I found a ground under the dash above the fuse box and it is tight. This thing is really starting a piss me off. I'm thinking it's going back on jackstands til next year. I'm at a lose and there is no one around here to take it too. Any more suggestions? It's a 72 that I would like to (IMG:style_emoticons/default/ar15.gif) right now!

[gothspeed]

Do the 4 way flashers work? If not, check you have power (12 volts) on pin #49
on the flasher relay (Red wire) also check that there is no power on #31 (Brown wire) if you have voltage there your ground wire is bad. Do this with the key off
and 4 ways on.

The 4 ways don't work. I do have 12v at the red wire and nothing at the brown wire. I have another relay ordered from Pelican that should be here Friday. I'm hoping that fixes it but I'm betting it won't!

My 4-ways flash ....... only the LH siganl doesn't work ........ I will do some DMMing with that awesome schematic that was posted ........ (IMG:style_emoticons/default/smile.gif)

[904svo]

Do the 4 way flashers work? If not, check you have power (12 volts) on pin #49
on the flasher relay (Red wire) also check that there is no power on #31 (Brown wire) if you have voltage there your ground wire is bad. Do this with the key off
and 4 ways on.

The 4 ways don't work. I do have 12v at the red wire and nothing at the brown wire. I have another relay ordered from Pelican that should be here Friday. I'm hoping that fixes it but I'm betting it won't!

My 4-ways flash ....... only the LH siganl doesn't work ........ I will do some DMMing with that awesome schematic that was posted ........ (IMG:style_emoticons/default/smile.gif)

Are you talking about the LH signal in the tack or the bulbs on the outside ( left side)?