914 1.7 Knocking Sound -- New Here, First Post, Horrible knocking coming from the motor |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914 1.7 Knocking Sound -- New Here, First Post, Horrible knocking coming from the motor |
UberElectricEagle |
Sep 20 2009, 07:20 PM
Post
#1
|
atomic Group: Members Posts: 43 Joined: 10-August 09 Member No.: 10,659 Region Association: None |
Greetings. I am new to the Porsche world and I purchased a 1972 914 1.7 about a month ago. It's a pretty nice car over all, but I think the motor, or part of the motor, might be toast.
When I purchased it, it badly needed a muffler. The knocking noise was harder to notice and sounded more like an exhaust leak over the horrible sound of the lack of a working muffler. The car seemed to run decent even with the poor exhaust and the price was good so I bought it. I just wanted a decent car over all that I could drive around for fun on sunny days before the winter gets here. It came with stainless heat exchangers I installed and I installed a really nice dual muffler from Dave at Triad. When I fired it up with the new muffler, I really noticed the knocking when I drove it since the all the exhaust leaks were now sealed up and I wasn't wearing ear plugs. At idle it's not too bad, but once I get going, the knocking is very noticeable. It's odd too, because it's not real consistent under power in motion. To me it sounds like the noise is coming from the #1 cylinder. I think the cylinder is providing no power, because when I take the wire off the cap, there is really no change in performance. (I put a video link of the horrible sound below.) Any advice on where to go from here would be great. My gut feeling is telling me the motor is going to have to come out. If I'm going to do all that, I might as well put a 2.0 liter in or ????? I'd even settle for just a solid running motor with some minor upgrades to make it a little quicker. Any advice on what route to take on a good used motor would be great. I guess A motor that runs on 4 cylinders would be an upgrade. Thanks for your help, a mildly depressed Sam http://www.youtube.com/watch?v=a5JhEd7SUH4...re=channel_page |
Cupomeat |
Sep 22 2009, 02:49 PM
Post
#2
|
missing my NY 914 in VA Group: Members Posts: 1,336 Joined: 26-November 07 From: Oakton VA Member No.: 8,376 Region Association: MidAtlantic Region |
Any update?, Inquiring minds WANT to know!
|
UberElectricEagle |
Sep 22 2009, 08:03 PM
Post
#3
|
atomic Group: Members Posts: 43 Joined: 10-August 09 Member No.: 10,659 Region Association: None |
Any update?, Inquiring minds WANT to know! Checked the valves and only a few needed adjusting, but not bad. Everything looked in order under the valve covers. I wanted to check the valves anyway since the car is new to me. Sure is fun climbing around under a car and always leaving your tools in the wrong place. Pulled the plug from #1 and it was fouled bad. Ugliest plug I've ever pulled from one of my cars over the past 19 years. I believe the Plug wire was pretty much separated from the (term slips my mind) orange insulator thing that goes onto the plug. I got that sorted out for now. On my way to the parts store for 4 new NGK plugs for now and see how that goes. Import parts are not a common thing in Skagit Valley. I'll update in a bit on how she runs with some new plugs. |
Lo-Fi Version | Time is now: 10th June 2024 - 06:07 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |