Wiring - i'm in deep ! keep going? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Wiring - i'm in deep ! keep going? |
advtracing |
Oct 19 2009, 12:10 AM
Post
#1
|
Member Group: Members Posts: 73 Joined: 27-September 09 From: New Zealand Member No.: 10,853 Region Association: None |
I'm stripping the car for ready for body work and paint. So ....leave the wiring loom alone were it's at ? or jump in and remove the hole thing for repair and hope to figure it out later?
Note ; the car was already 2/3rd's stripped by a past owner , little to no tags on the loom and boxes of parts so hay it's a jigsaw anyway.......... |
burton73 |
Oct 19 2009, 02:33 PM
Post
#2
|
burton73 Group: Members Posts: 3,556 Joined: 2-January 07 From: Los Angeles Member No.: 7,414 Region Association: Southern California |
Wrap up what you have where it is very good so the paint does not get to it. Remove the black vinyl covers on the fold overs in the trunks that hold the wire in place for the looms and coil the wires in neat rolls and cover then in paper and masking tape so the paint does not get to it. Cover the long parts of the loom that you cannot remove in the engine bay with paper and tape or plastic film and masking tape so it does not get painted.
After the paint you can put the black vinyl covers back on the fold over in the trunks that hold the wire in place for the looms and it will look very clean and pro like. Bob |
Lo-Fi Version | Time is now: 13th June 2024 - 03:22 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |