 914 Front Brake Upgrade, 944 Turbo Calipers |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| MikeSpraggi |
 Nov 14 2009, 03:29 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 781 Joined: 7-February 05 From: Silver Spring, Md Member No.: 3,570 Region Association: MidAtlantic Region  |
Is anyone out there running 944 Turbo front brake calipers on their 914? I have struts with 3.5" spacing, but what else do I need to make these work up front ... rotors, proportioning valve, etc.? Rear calipers will be SC.
Thanks |
   |
 
|
  |
Replies
| Steve |
Nov 15 2009, 09:47 PM
Post
#2
|
|
914 Guru Group: Members Posts: 5,619 Joined: 14-June 03 From: Orange County, CA Member No.: 822 Region Association: Southern California 
|
I don't know how much it matters but you will want to swap the bleaders and oil line bar on the calipers. The arrow on the caliper should match the tire rotation. You want the small piston on the top and the big one on the bottom. I had to do the same thing on my Boxster calipers because the 944 turbo and boxster put the front calipers on the back of the brake disk versus the front.
|
|
|
|
Posts in this topic
MikeSpraggi 914 Front Brake Upgrade Nov 14 2009, 03:29 PM
zig-n-zag Go to www.vehiclecraft.com. They have kits/adapte... Nov 14 2009, 05:11 PM ClayPerrine Actually, the 944 turbo calipers are fairly easy t... Nov 15 2009, 04:46 AM
MikeSpraggi
Actually, the 944 turbo calipers are fairly easy ... Nov 15 2009, 09:09 AM
rfuerst911sc
Actually, the 944 turbo calipers are fairly easy... Nov 15 2009, 09:12 AM Gary
Actually, the 944 turbo calipers are fairly easy ... Nov 15 2009, 12:33 PM Vysoc Correct, the spacing on the 944T Caliper is 3.75... Nov 15 2009, 09:28 AM iamchappy I run 944t brakes on all 4, backyard method machin... Nov 15 2009, 04:07 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 12:32 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.