 Dupont centari Paint seems way dry..., tried a couple of things on the paint need opinions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| wayne1234 |
 Dec 24 2009, 10:11 AM
Post
#1
|
|
Member  Group: Members Posts: 260 Joined: 6-April 09 From: indianapolis in Member No.: 10,238 Region Association: None  |
Well my local paint store kinda convinced me to paint the 914 with Dupont centari, Single stage Enamel, I'm using the low temp reducer, and not the "gloss enhancer"... So the directions say 8 parts paint 2 parts reducer...It kinda warm her and the garage is staying at mid 60 constantly.... it is mega thich and I'm having to go more like 8 paint and 4 reducer.. but it is mega dry and doesnt flow out.... and mega orange peel... I 'm using a Sata JET NR 95 HVLP gun and a 1.5 tip, which is what I have always used, but I havent ever shot out singe stage in it,,, What the hell is going on. I used to paint a fair amount, But in the last 5 years the only thing I have shot is panel repair on our explorer after 2 separate accidents, last time was about 2 years ago...
|
   |
 
|
  |
Replies
| rick 918-S |
Dec 24 2009, 10:24 PM
Post
#2
|
|
Hey nice rack! -Celette Group: Members Posts: 21,008 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region 
|
If your going to wash it down you need to get right on it. If it's been a day it's set. Forget about it.
You can try to wet sand and buff it. But the shine will suck. You can try to sand and recoat it with hardner but it my cause the un-hardened paint to wrinkle. |
|
|
|
Posts in this topic
wayne1234 Dupont centari Paint seems way dry... Dec 24 2009, 10:11 AM
THE STIG Reducer, or activator, you may need both. 60 degr... Dec 24 2009, 10:17 AM PanelBilly Have you tried reducing the air pressure or the si... Dec 24 2009, 10:20 AM wayne1234 I have tried everything with the gun... actually a... Dec 24 2009, 10:24 AM wayne1234 Also they said not to use the 793 "hardener g... Dec 24 2009, 10:30 AM wayne1234 looking online it looks like Dupont changed their ... Dec 24 2009, 11:32 AM r_towle to much paint may mean not enough air..
enough is ... Dec 24 2009, 12:38 PM charliew If the airhose is long, say 25 feet and the id is ... Dec 24 2009, 12:47 PM scotty b 4:1 paint to hardener is how I mix it, then thin i... Dec 24 2009, 02:38 PM DonTraver If it's too thick, it means you haven't ad... Dec 24 2009, 07:07 PM rick 918-S Centari is a good low cost product. BUT, If you ha... Dec 24 2009, 07:54 PM wayne1234 So IF i can get it off the car should I keep with ... Dec 24 2009, 08:56 PM rick 918-S No no... Jambs will be fine, Just mask them. If yo... Dec 24 2009, 09:03 PM wayne1234 OK did some tests,,, I tried the lacquer thinner o... Dec 24 2009, 10:13 PM wayne1234 I dont think the lacquer strip is a possibility ri... Dec 24 2009, 10:36 PM
rick 918-S
I dont think the lacquer strip is a possibility r... Dec 24 2009, 10:55 PM wayne1234 I had stopped shooting so right now there is 1 coa... Dec 24 2009, 11:05 PM rick 918-S Wayne,
You may not get an answer this weekend but... Dec 25 2009, 12:12 AM etcmss this discussion was really helpful. I have painte... Dec 26 2009, 05:47 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd July 2025 - 08:47 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.