Progress Update and two questions.... Options

[quadracerx]

I began trying to diagnose a part throttle miss....idles great...takes throttle great....hold throttle at almost any RPM and it misses.....seems to not miss as bad at higher RPM....its carbed... (IMG:style_emoticons/default/WTF.gif)

Checked the folowing:

Timing
Fuel pressure...

Started to mess with the what I like to call "mixture thumbscrews" until the miss got a bit better but still not gone....A friend told me to try pouring some "Seafoam" in with the gas on the next fill up....AND although Im not a big "magic elixer" will fix it guy.... Everyone I asked said this Seafoam stuff worked for them (4 people out of 4 gave good reviews) and so....I poured a bottle of this stuff in....and WHAM...miss is almost completely gone.....and improving seemingly the more I drive it (IMG:style_emoticons/default/confused24.gif)

Hey...whatever works I guess..So now Im planning an hour long drive to and from Tacoma....in the near future....

Ok so now the two questions...

1) How do I identify what Webers I have?

2) Is the fuel expansion tank standard equiptment on all 914 that came with Fuel Injection? And do I need it when I go to a V8 on my other car?

Ok...guess that was really three questions.....

Thanks again for all your help..

Steve

[rick 918-S]

I'm not sure where you started on this but here's my advise. 90% of carb problems are electrical. Specially when you discribe a miss condition while holding RPM's.

1) start with the dizzy, check the shaft for play

2) check the points and condensor, Hell, just replace them but be sure the voltage going to the points is correct and not frying them within the first couple of minutes running.

3) replace the wires. If they are new check them for resistance. I had a set of wires once that was purchased new and had one with poor connection on the terminal. I chased that thing for a week!

4) replace the cap and rotor. If their new check to see a bad wire hasn't caused a miss fire from the cap terminal to the dizz body. (shortest distance to ground and acts like an intermitent miss fire)

5) Check the coil for carbon tracking poor output and corrosion at the connections. Triple check the coil wire.

6) spark plugs should go without saying.. Check for carbon tracking and miss matched colored electrode. That should pin down the errent cylinder.

Be sure your timing is correct and any advance curve you have is working correctly.

THEN start on the carb work from the fuel pressure through the filter then the carb guts.

Good luck.