 Rear 6 caliper spacers?, I want to do this, how hard is it? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jeffs9146 |
 Mar 3 2004, 02:12 PM
Post
#21
|
|
Ski Bum  Group: Members Posts: 4,062 Joined: 10-January 03 From: Discovery Bay, Ca Member No.: 128  |
QUOTE Yes, the rear calipers are widened. Rich did this to fit the vented rotors. I wanted to retain rear parking brake and reason for sticking with stock 914 rear calipers. What all is involved if I want to put vented rotors on the rear of my factory 6? Can I just purchase the rotors, spacers, pins and bolt it all together? Jeff Attached image(s) 
|
   |
 
|
  |
Replies
| davep |
Mar 3 2004, 03:42 PM
Post
#22
|
|
914 Historian Group: Benefactors Posts: 5,151 Joined: 13-October 03 From: Burford, ON, N0E 1A0 Member No.: 1,244 Region Association: Canada  |
I think the rotor to get is the early style, not SC which is thicker. You will also need to have spacers made to move the rotor out into the center of the caliper (about 5mm). Yes, the 914/6 caliper mod is relatively easy. I think matching the year of the caliper and rotor may work. I have not had late calipers mated to the thicker rotors in my hands to see if there are differences in the spacers.
|
|
|
|
Posts in this topic
Jeffs9146 Rear 6 caliper spacers? Mar 3 2004, 02:12 PM
davep For an original 914/6 caliper, just find some scra... Mar 3 2004, 02:38 PM Jeffs9146 QUOTE
Jeffs9146 QUOTE
sechszylinder ... Mar 4 2004, 04:06 AM John2kx Jeff,
The spacer needed to center caliper over ro... Mar 4 2004, 06:06 AM ArtechnikA ... Mar 4 2004, 06:07 AM davep :agree:
The spacer looks like a spacer used betw... Mar 4 2004, 09:05 AM sechszylinder brant I've home-made the spacers before on a -4 rear... Mar 4 2004, 09:42 AM ArtechnikA davep Rich,
Just measure the shank length of the longes... Mar 4 2004, 10:13 AM ArtechnikA Brad Roberts Just FYI.. the 9146 caliper and 914/4 caliper halv... Mar 28 2004, 01:09 AM SirAndy <... Mar 28 2004, 06:18 AM SirAndy QUOTE
davep Brad, et al, are correct. The 914/4 is a much smal... Mar 28 2004, 05:30 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 02:22 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.