 Fan Belt access cover for six, Innovation or WTF? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bfrymire |
 Apr 17 2010, 06:28 PM
Post
#1
|
|
Salsaholic  Group: Members Posts: 590 Joined: 1-August 04 From: Sunnyvale, CA Member No.: 2,431 Region Association: Northern California  |
Well,
Working on the 914 again, and was making room for an EMC so, I removed the backpad, and this is what I found. Well, I had seen the panel from the engine compartment, and knew it was there. So, here's the hole:  And the cover, WTF? Farmer bob did this one?  Ok. It works, and I am not the best craftsman, as I have done a couple of, eh, quick-fixes for a problem, which I fixed later. So, put it back? Rather not. Any ideas? -- brett BTW, the PO also put an access panel in for the starter.  This will be used for the remote battery. I will clean up and make something for it. The battery cable is temporarily there... (just made a minor edit. I said timing, when I meant fan! Doh.) |
   |
 
|
  |
Replies
| pcar916 |
Apr 20 2010, 10:44 AM
Post
#2
|
|
Is that a Lola? Group: Members Posts: 1,523 Joined: 2-June 05 From: Little Rock, AR Member No.: 4,188 Region Association: None 
|
Whatever you do don't spend more than a couple of hours doing it. Then DRIVE! (IMG:style_emoticons/default/driving.gif)
|
|
|
|
Posts in this topic
bfrymire Fan Belt access cover for six Apr 17 2010, 06:28 PM
Mark Henry Many /6 guys cut a hole there so they can set the ... Apr 17 2010, 06:43 PM
bfrymire
Many /6 guys cut a hole there so they can set the... Apr 17 2010, 08:05 PM GeorgeRud I haven't cut the access hole in my firewall (... Apr 17 2010, 07:15 PM ClayPerrine
I haven't cut the access hole in my firewall ... Apr 19 2010, 11:19 AM SLITS
I haven't cut the access hole in my firewall ... Apr 19 2010, 03:24 PM Dr Evil I put a nice hole in my firewall and made a nice d... Apr 17 2010, 08:16 PM jt914-6 Some pics of Pcar916's cover. I need to make o... Apr 18 2010, 02:50 PM rfuerst911sc I cut a decent sized opening in my firewall for my... Apr 18 2010, 03:08 PM Root_Werks I'm not for cutting holes in the firewall of a... Apr 19 2010, 11:27 AM pcar916 My access hole pictured above by JT9146 uses Dzus ... Apr 19 2010, 11:46 AM Root_Werks There you go!
That looks like something that ... Apr 19 2010, 11:49 AM pcar916
There you go!
That looks like something that... Apr 19 2010, 12:00 PM tat2dphreak as good as the idea sounds on paper, there would h... Apr 19 2010, 05:05 PM pcar916
imo you'd have to make some sort of fire-gask... Apr 19 2010, 06:37 PM rfuerst911sc I really think you guys are over thinking this acc... Apr 19 2010, 06:45 PM Dave_Darling Evidently the really tough part is actually notici... Apr 19 2010, 07:55 PM Mike Knox Here's a shot of my access panel. I covered t... Apr 19 2010, 08:45 PM Mike Knox Here's another view, this view is obviously fr... Apr 19 2010, 08:54 PM brant I think I might have the lightest one (aluminum): Apr 19 2010, 10:00 PM brant covering: Apr 19 2010, 10:01 PM bfrymire
covering:
Ok. That one I really like. TIme t... Apr 20 2010, 12:06 AM Maltese Falcon This cutout was made for the horizontal fan bi-tur... Apr 20 2010, 06:35 AM dennisc Best way to change the belt on a 6 is take the rea... Apr 20 2010, 07:36 AM tat2dphreak aluminum also has the lowest melting point... Apr 20 2010, 09:04 AM Dave_Darling But it's fine for a race car. Why? Because y... Apr 20 2010, 10:07 AM Root_Werks There is a pretty old thread somewhere about this.... Apr 20 2010, 10:28 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th July 2025 - 04:40 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.