Front turn signal buckets, How was the finish applied to the interior? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914/4: 70 71 72 73 74 75 76 914/6: 70 71 72
Front turn signal buckets, How was the finish applied to the interior? |
Pat Garvey |
May 15 2010, 07:59 PM
Post
#1
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
i Recently acquired a pair of factory-new front turn signal buckets from Camp914. No doubt about it, they are sweet, but I expected something more brilliat than my 38 year old originals - no fault to Camp914. Just didn't realize that my originals were that preserved!
Regardless, my question is this - how was the "chrome" finish applied to the inside? It's obvious to me that it was some sort of spray compound (see the pic with the pronounced overspray). In 1978, I removed my original buckets for an impending respray of the body. At that time, as and old fart recalls, the exterior finish of the buckets looked like it needed refurbishing, so I sprayed them with light gray & clearcoated them (that also shows in the pics). I swear - it looks like the "chrome" finish was a spray-on. What did they use? Where can I get some? Look at the pics. The grubby exterior is original. The painted finish is my effort. Pat Attached image(s) |
Pat Garvey |
May 15 2010, 08:43 PM
Post
#2
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
Interesting for contemporary time, but what did they do in 1970?
Pat |
70_914 |
May 15 2010, 10:02 PM
Post
#3
|
Member Group: Members Posts: 395 Joined: 4-December 09 From: Roy, WA Member No.: 11,096 Region Association: Pacific Northwest |
|
Tom_T |
May 15 2010, 11:56 PM
Post
#4
|
TMI.... Group: Members Posts: 8,318 Joined: 19-March 09 From: Orange, CA Member No.: 10,181 Region Association: Southern California |
Interesting for contemporary time, but what did they do in 1970? Pat Plastic hasn't changed.... ... except that IIRC - the buckets were pot metal not plastic & the chrome surface is direct to that, but then I'm an old fart too!!?? Pat, I can't say what they did in the day, but I've read several posts on here etc. that folks are using the Chrome Spray Paint (the super shiney one) available at Home Depot, Lowes, home improvement centers & local FLAPS to refinish both the plastic & metal type reflectors successfully. Just make sure it's the formula for whichever material you're painting. If you search here, there are pix of their resto work posted, but may be awhile back. Plz post pix of your results too meistro! (IMG:style_emoticons/default/biggrin.gif) |
Pat Garvey |
May 16 2010, 07:03 PM
Post
#5
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
Interesting for contemporary time, but what did they do in 1970? Pat Plastic hasn't changed.... ... except that IIRC - the buckets were pot metal not plastic & the chrome surface is direct to that, but then I'm an old fart too!!?? Pat, I can't say what they did in the day, but I've read several posts on here etc. that folks are using the Chrome Spray Paint (the super shiney one) available at Home Depot, Lowes, home improvement centers & local FLAPS to refinish both the plastic & metal type reflectors successfully. Just make sure it's the formula for whichever material you're painting. If you search here, there are pix of their resto work posted, but may be awhile back. Plz post pix of your results too meistro! (IMG:style_emoticons/default/biggrin.gif) Tom, You are correct - the buckets are pot metal. The chrome finish was directly SPRAYED to the parts, hence the overspray on the sides. These are factory new buckets. I have a new set of chrome metal vacuum metalized foglight grills. They are super sweet, but dainty. Nope - two totally different processes. Somehow, back in the early 70's, someone had a spray process for placing a chrome-like finish onto metal parts (suspect it was the same process used then on foglight grille, though most of them are plastic based). History here boys & girls - who knows the answer? |
SirAndy |
May 18 2010, 01:17 PM
Post
#6
|
Resident German Group: Admin Posts: 41,679 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
used then on foglight grille, though most of them are plastic based I've only seen (and touched) one (factory) metal foglight grille. They are über rare ... (IMG:style_emoticons/default/popcorn[1].gif) Andy |
Lo-Fi Version | Time is now: 10th June 2024 - 03:07 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |