Stock Passenger Door Mirror, Where do they mount?? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Stock Passenger Door Mirror, Where do they mount?? |
aircooledtechguy |
Feb 26 2010, 10:01 AM
Post
#1
|
The Aircooledtech Guy Group: Members Posts: 1,966 Joined: 8-November 08 From: Anacortes, WA Member No.: 9,730 Region Association: Pacific Northwest |
I scored me a passenger door mirror today on CL. Now I need to get ready to mount it.
1. Do all the cars have the captured nuts under the door skin similar to the drivers door that just need to be drilled out through the skin?? If so, I assume drilling from the inside of the door out is the way to do this?? 2. If not and I will have to add my own nuts to the screws, does anyone have the correct location I will need to locate it so it's usable?? I know it needs to be aft of the drivers side a bit Thanks!! |
aircooledtechguy |
Feb 26 2010, 07:27 PM
Post
#2
|
The Aircooledtech Guy Group: Members Posts: 1,966 Joined: 8-November 08 From: Anacortes, WA Member No.: 9,730 Region Association: Pacific Northwest |
Thanks for all the great info guys. Yeah, I did try the search function. . . I guess I'll have to get my 9 y/o to help me with that in the future (IMG:style_emoticons/default/headbang.gif) (IMG:style_emoticons/default/shades.gif)
Thanks again. (IMG:style_emoticons/default/beerchug.gif) |
jcb29 |
May 24 2010, 03:31 PM
Post
#3
|
Member Group: Members Posts: 89 Joined: 29-August 04 From: Clovis, CA Member No.: 2,646 Region Association: Central California |
The Tech Article is on the bird's site. I drilled the two holes from the outside without removing the door panel. On the left side, carefully measure the center point location of the rear hole. Transfer that location to the right side. Center punch and drill 1/8" pilot hole then carefully expand hole size with progressively larger bits up to 3/16" making sure you are centered over the bolt hole after each larger drill bit. Do not exceed 3/16" bit size because you will ruin the threads of the bolt welded to the inside of the door skin. Measure and drill second hole. Smooth edges of metal door skin with a rat tail file, touch up bare metal, let dry - mount reversed mirror with the correct screws and the hard rubber trim.
|
Lo-Fi Version | Time is now: 1st June 2024 - 05:14 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |