Fog lights Options

[partwerks]

Since I lost this person's contact information/email, I'm trying to get ahold of the fella who was making the foglights that had the lights from an airplane mounted into them. Apparently he had worked at a airport at some point. I was thinking his first name was Sergio, but I could be wrong on that. I recall he was from CA.
I had one light take a dump and need of a replacement is why.
Anyone know of this person. I was thinking this site is where I oringinally found out about them.

LK

[realred914]

might take the bad light to a local airport maintance shop and see if it can be sourced that way or use the trusty internet, see if you cant find a name or part number on teh unit you have and see if it comes up in a search.

good luck

PS let us know, that sounds like that ought to be one heck of a bright light!!!

[Mikey914]

might take the bad light to a local airport maintance shop and see if it can be sourced that way or use the trusty internet, see if you cant find a name or part number on teh unit you have and see if it comes up in a search.

good luck

PS let us know, that sounds like that ought to be one heck of a bright light!!!

I'm actually working on a system to directly replace the old light / lens with a sealed bean unit. I did this inthe 80's with my car. Worked great. I plan to make the rubber to hold the light in too. I'll PM you a little later.
-Mark

[Rand]

I'm actually working on a system to directly replace the old light / lens with a sealed bean unit.

I love sealed bean units. Just beware that under some conditions they can be dangerously explosive because of the internal gas buildup. Kind of like dead armadillos in the desert. (Warning, do not kick the armadillos.)
(IMG:style_emoticons/default/laugh.gif)