 Stripper Recommendations, for Paint removal - not to watch at a bar! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| wrightee |
 Jun 5 2010, 04:06 PM
Post
#1
|
|
Member  Group: Members Posts: 83 Joined: 18-November 09 From: Montclair, VA Member No.: 11,053 Region Association: MidAtlantic Region  |
I'm getting closer to having my shell prepped for stripping and repainting, and wanted to know what products you all have had success with in removing the old paint.
My car looks like it was repainted once, with a thick primer and coat on top of the factory finish (nearly 1/16" build up). The repaint was then baked in the California sun and has a lot of cracks in it.  I used Peel Away once on a boat hull with good results, and see they advertise that for auto use now as well. Its pricey, but cleanup was easy in a boat yard...may not be as beneficial in my garage though... Also, what works for removing the glue under the engine heat/sound pad?  |
   |
 
|
Posts in this topic
9146986 3M bristle disc on a 90* die grinder is the best t... Jun 5 2010, 05:22 PM charliew And lots of ventilation. If it gets in a crevice o... Jun 5 2010, 08:20 PM Krieger914 If you do paint strip collect it, let it dry and t... Jun 5 2010, 10:16 PM
Lou W This is what I've always used. Apply one direc... Jun 5 2010, 10:27 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th July 2025 - 08:25 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.