 Brake Bleeding Questions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| kenshapiro2002 |
 Jun 15 2010, 07:20 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,486 Joined: 23-July 09 From: Bawlmer, MD Member No.: 10,598 Region Association: MidAtlantic Region  |
OK...so I had to tear the left front strut out for replacement, and drained out the brake lines on that side. After I get the new strut in, I'm gonna take it to a local Porsche wrench for a front end alignment and to have him check out my work in securing the struts, ball joints, tie rod ends, etc. I'm sure I did a "bang up" job, but figure I'll let an expert check out my work for any uck fups. When I bleed the line on the front left side because of my work, do I need to do all four corners (hey...haven't bled brakes in 30 years)?
I have "M" calipers off of a 911 up front. Any tricks or special "need to knows" about bleeding these things? Is it easier to buy out of the Mighty Vac thingamajigees? |
   |
 
|
  |
Replies
| type47 |
Jun 16 2010, 07:44 AM
Post
#2
|
|
Viermeister Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region |
(IMG:style_emoticons/default/agree.gif) to bleed all 4 corners. Old brake fluid will absorb water and rust out the brake system from the inside. Factory (well, maybe VW Passat) maintenance says flush system every 2 yrs. I have a blog entry showing the Motive hooked up to my car.
Edit: ... or easier if I just paste the pic here  |
|
|
|
Posts in this topic
kenshapiro2002 Brake Bleeding Questions Jun 15 2010, 07:20 PM
john rogers I would recommend a pressure bleeder instead of a ... Jun 15 2010, 07:32 PM
kenshapiro2002 Damn...what a great idea!
Why pressure vs. va... Jun 15 2010, 08:18 PM Spoke Another key to keeping fluid in the reservoir and ... Jun 15 2010, 08:17 PM kenshapiro2002 You mean another human being? I'll probably be... Jun 15 2010, 08:20 PM Vacca Rabite Ken, get a pressure bleeder. they cost ~$50,... Jun 16 2010, 06:08 AM kenshapiro2002 Will any of them fit the 914's reservoir for s... Jun 16 2010, 07:43 AM 6freak if ya got the car off the ground,why wouldnt you d... Jun 16 2010, 07:23 AM URY914 If the fluid is fresh, you can only bleed the one ... Jun 16 2010, 07:51 AM kenshapiro2002 Yeah, but it works when they do it to me...jewish ... Jun 16 2010, 08:00 AM type47 my error Jun 16 2010, 08:04 AM kenshapiro2002 Yeah...didn't say "the" brakes hadn... Jun 16 2010, 08:14 AM URY914 I was just in the barber shop and some guy was com... Jun 16 2010, 09:16 AM kenshapiro2002 Of course...if he's leaking enough, it's a... Jun 16 2010, 09:19 AM underthetire I'm sure all those fancy bleeders are super ni... Jun 16 2010, 09:35 AM kenshapiro2002 Don't see any way for suction...how's it w... Jun 16 2010, 09:52 AM underthetire Just hook it to the bleeder and pump the brakes sl... Jun 16 2010, 10:07 AM 6freak Like they say in the classic`s ,there is no fr... Jun 16 2010, 12:37 PM corsepervita
I would recommend a pressure bleeder instead of
... Jun 16 2010, 01:32 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 04:05 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.