Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Heater blower wire on a 76, in a 72 car
markb
post Jun 21 2010, 04:59 PM
Post #1


914less :(
*****

Group: Members
Posts: 5,449
Joined: 22-January 03
From: Nipomo, CA
Member No.: 180
Region Association: Central California



OK gang, I need some help here. IIRC from my 1.7 Djet in the 72, the heater blower wire was in the harness on the drivers side. I recently transplanted a 76 2.0 Djet motor into the car and don't seem to have that wire. I realize the blower was mounted differently in 76, but where is the wire? Do I need to run one from the relay board?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
SirAndy
post Jun 21 2010, 05:17 PM
Post #2


Resident German
*************************

Group: Admin
Posts: 41,669
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California



Solid green wire ...

On early cars, goes from Pin 10 on the rear connector into the engine harness.

On late cars, Pin 10 is jumped to Pin 11 on the rear connector and the green wire comes out of the main harness before the relay board.

On your '72 you will need to remove the '76 'jumper' in the engine harness and run a (green!) wire from Pin 10 to the heater blower.

(IMG:style_emoticons/default/popcorn[1].gif) Andy
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 2nd June 2024 - 01:22 AM