 Relay board wiring help, Making sense of the relay board diagram |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| enikolayev |
 Jun 28 2010, 10:23 PM
Post
#1
|
|
Member  Group: Members Posts: 50 Joined: 18-November 07 From: Gulfport, MS Member No.: 8,349 Region Association: South East States  |
It has been three years since the car drove but i have finally rebuilt the engine and reinstalled it. Now i'm trying to wire it all up. Too bad i didn't keep a record of where everything went.
I'm looking at the relay board diagram and most of the wires are accounted for except a few oddballs don't seem to match. The car is a '74 with a 1.8 on Webbers Wires in italics are not accounted for  I think these wires go to the area outlined in red on the Relay Board Diagram (to be posted) Here we have the following wires: Green w/ Red Stripe Green w/ Black stripe Green (2) Grey w/ Brown Stripe Black w/ Red Stripe Black w/ Purple Stripe White Thick Yellow which turns into Red |
   |
 
|
  |
Replies
| type47 |
Jun 29 2010, 02:21 AM
Post
#2
|
|
Viermeister Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region |
The connection you circled in green is the "14 pin" connector. Those wires go in a "plastic" connector that is then pushed onto the pins on the relay board. You can see from your relay board diagram there are 13 wires used; number 6 is not used. The one circled in red is the "12 pin" connector and there should also be a plug. There are good color electrical schematics on PelicanParts.com that you can use to trace continuity of your circuits.
|
|
|
|
Posts in this topic
enikolayev Relay board wiring help Jun 28 2010, 10:23 PM
enikolayev
I think this group goes into the area outlined i... Jun 28 2010, 10:32 PM enikolayev
And finally the Relay Board Diagram
Thanks in a... Jun 28 2010, 10:34 PM enikolayev My relay board had no connector. The wires go dire... Jun 29 2010, 02:24 AM type47 Maybe the connectors were "lost" during ... Jun 29 2010, 02:28 AM Spoke You are correct that the wires from Post 1 go to t... Jun 29 2010, 05:18 AM 9146986 You need to source a salvaged 12 pin female connec... Jun 29 2010, 06:14 AM detoxcowboy http://bowlsby.net/914/WiringHarnesses/
at the ne... Jun 29 2010, 08:26 AM type47 These are pix of the 14 pin connector. I can't... Jun 29 2010, 09:27 AM enikolayev Alright i've got all of the schematics from pe... Jun 29 2010, 01:52 PM Jeff Bowlsby I have an extra 14-pin connector housing (no conta... Jun 29 2010, 01:56 PM Spoke I've got an extra 12 pin connector if you need... Jun 29 2010, 07:47 PM enikolayev The WTB thread proved fruitful. I've got the p... Jun 30 2010, 09:45 PM enikolayev
While i wait for the parts, could you guys help... Jul 1 2010, 03:44 PM
Cap'n Krusty
While i wait for the parts, could you guys hel... Jul 1 2010, 04:18 PM type47 My first guess was for the double relay since you ... Jul 1 2010, 03:51 PM windforfun Do you have wiring diagrams for the car? They are... Jul 1 2010, 03:57 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 08:47 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.