 My sound deadining projeck |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jsayre914 |
 Aug 15 2010, 04:21 PM
Post
#1
|
|
Speed Up !!!  Group: Members Posts: 3,210 Joined: 10-February 08 From: Timonium MD 21093 Member No.: 8,696 Region Association: MidAtlantic Region  |
Well,
I am waiting for my exhaust to come back from the ceramic coater, so why not start the next project (IMG:style_emoticons/default/biggrin.gif) I just recieved my shipment of second skin. I bought the damplifier, overkill and luxury liner. I am not sure if i will use it all but I want to see what works better where. I will post some pics once i get underway. I already have an aftermarket engine bay pad from evil bay. it works pretty good. this stuff i just got will go on the interior only. I also plan to reinstall the rear window with some new butyl tape when i begin. (just say NO to water) i wonder how many projects i can start at one time (IMG:style_emoticons/default/idea.gif) here is the link to the stuff i bought http://www.secondskinaudio.com/ |
   |
 
|
  |
Replies
| VaccaRabite |
Aug 15 2010, 04:48 PM
Post
#2
|
|
En Garde! Group: Admin Posts: 13,728 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region 
|
Funny! This Second Skin product JUST showed up on the Jeep board that I am on too. Let me know what you find out.
Zach |
|
|
|
Posts in this topic
jsayre914 My sound deadining projeck Aug 15 2010, 04:21 PM
RJMII That spectrum sludge looks pretty interesting, wit... Aug 15 2010, 04:26 PM Gint I'm also interested in the results! Aug 15 2010, 06:12 PM PanelBilly Me two Aug 16 2010, 09:26 AM nsyr I just removed a product similar to spectrum sludg... Aug 16 2010, 10:03 AM charliew Was it causing rust or had it been put on top of e... Aug 16 2010, 12:13 PM jsayre914 I didnt get very far, but i started yesterday. I g... Aug 18 2010, 12:49 PM jsayre914 trunk pics :) Aug 18 2010, 12:52 PM McMark I've used all those products. The Spectrum Sl... Aug 18 2010, 01:30 PM jsayre914 cool video, thanks. I will not be using spectrum o... Aug 18 2010, 06:06 PM Vacca Rabite When I did mine, this is how I did it.
I wire bru... Aug 18 2010, 06:21 PM scotty b IMHO you should remove the factory tar boards and ... Aug 18 2010, 06:25 PM
jsayre914
IMHO you should remove the factory tar boards and... Aug 18 2010, 09:04 PM McMark The 'tar boards' are on the floor pan and ... Aug 19 2010, 11:32 AM SirAndy
The 'tar boards' are on the floor pan and... Aug 19 2010, 11:44 AM SirAndy Btw. the tar comes off in fairly large chunks if y... Aug 19 2010, 11:51 AM SirAndy After tar removal:
http://www.914world.com/bbs2/u... Aug 19 2010, 11:52 AM jsayre914 :toke: so what you guys are telling me is that wha... Aug 19 2010, 12:42 PM ellisor3
:toke: so what you guys are telling me is that wh... Aug 19 2010, 02:28 PM LotusJoe
[quote name='jsayre914' post='1358305' date='Aug ... Aug 19 2010, 03:05 PM SirAndy In looking at the pictures, it looks like the tar ... Aug 19 2010, 04:21 PM jsayre914 I have been really busy, recently, no time to work... Aug 25 2010, 02:36 PM jsayre914 this is where i stopped.. Aug 25 2010, 02:38 PM jpnovak You are using the slow method.
Here is my metho... Aug 25 2010, 02:43 PM markb Even easier: dry ice.
Drop it on there, stand ba... Aug 25 2010, 03:20 PM Vacca Rabite I don't think Joe wants the undercoating off t... Aug 25 2010, 06:04 PM jsayre914 Tar is gone
:Qarl: :Qarl:
Now what is my next ... Aug 26 2010, 10:27 AM jsayre914 THE UGLY :sick: Aug 26 2010, 10:29 AM Vacca Rabite The bolts that point forwards are, I think, welded... Aug 26 2010, 10:52 AM jsayre914
The bolts that point forwards are, I think, welde... Aug 26 2010, 11:00 AM Vacca Rabite
The bolts that point forwards are, I think, weld... Aug 26 2010, 11:40 AM charliew If that car has been up north it's whole life ... Aug 26 2010, 11:15 AM realred914
If that car has been up north it's whole life... Sep 4 2010, 12:52 PM Bleyseng
If that car has been up north it's whole lif... Sep 4 2010, 01:00 PM jsayre914 never enough time to work on the car <_< bu... Sep 4 2010, 12:30 PM realred914 ditch that POR 15 crap and invest in some good aut... Sep 4 2010, 12:48 PM Vacca Rabite If you want to get the epoxy, they sell the Nason ... Sep 4 2010, 04:34 PM jsayre914 dont be mad guys, i already got the por-15 crap. i... Sep 4 2010, 06:38 PM charliew The only way you will like the por15 with a top co... Sep 6 2010, 03:01 PM jsayre914
The only way you will like the por15 with a top c... Sep 6 2010, 03:43 PM Vacca Rabite No, you don't.
You an POR15 it and just put t... Sep 6 2010, 06:23 PM scotty b :popcorn: :popcorn: :poke: :poke: :popcorn: :... Sep 23 2010, 07:41 PM Vacca Rabite I stopped over at Joes the other day to drop off a... Sep 24 2010, 06:16 AM jsayre914 No time for pics today, but i am ready for paint. ... Sep 28 2010, 04:02 PM jsayre914 progress :beer3: Sep 28 2010, 08:15 PM championgt1 Man that looks really nice! Sep 28 2010, 09:19 PM dlee6204 :agree: It looks awesome. Sep 28 2010, 10:43 PM silver74insocal pretty as a peach!! ya i used the damplifi... Sep 28 2010, 10:53 PM scotty b Now take your sound deadening pad and cut it into ... Sep 29 2010, 07:01 AM jsayre914 B)-->QUOTE(scotty b @ S... Sep 29 2010, 07:14 AM
sean_v8_914 I have done many inner fire walls with dyna mat or... Sep 29 2010, 07:16 AM
sean_v8_914 alot of new metal under this one.
since I coated a... Sep 29 2010, 07:23 AM
sean_v8_914 two layers or one layer of rattle trap extreme Sep 29 2010, 07:27 AM
sean_v8_914 very important to seal the rear window very well. ... Sep 29 2010, 07:29 AM
sean_v8_914 WARNING!!! POR 15 DOES NOT STICK WELL ... Sep 29 2010, 07:30 AM
Vacca Rabite the metal got well etched from the wire wheeling.
... Sep 29 2010, 07:59 AM
scotty b Sean is referring to a CHEMICAL etching that is re... Sep 29 2010, 08:05 AM
Vacca Rabite Isn't Metal Ready an etching product? its one... Sep 29 2010, 09:00 AM
strawman
Isn't Metal Ready an etching product? its on... Sep 29 2010, 09:20 AM
mikea100 I used Prep & Etch. It is cheaper and readily ... Sep 29 2010, 10:11 AM
scotty b Yes metal ready is proper, from what you stated it... Sep 29 2010, 10:26 AM
jsayre914 any tips or tricks on installing the sound mat. I ... Sep 29 2010, 04:32 PM
sean_v8_914 I am not familiar with the sound deadening you are... Sep 29 2010, 10:01 PM
jsayre914 the stuff i used said to keep all surfaces wet for... Sep 29 2010, 10:07 PM
jsayre914 Some work on the project yesterday :D Oct 10 2010, 03:29 PM
jsayre914 and one picture for scotty. See, i do listen to yo... Oct 10 2010, 03:31 PM
gothspeed
and one picture for scotty. See, i do listen to y... Nov 1 2011, 11:55 AM
SirAndy I've been thinking about using a different app... Oct 10 2010, 05:48 PM
Prospectfarms
I've been thinking about using a different ap... Nov 1 2011, 08:19 AM
scotty b You could have saved yourself so much time, aggrav... Oct 10 2010, 05:54 PM
tdgray Not to hijack... okay I did sorry...
Has anyone u... Oct 11 2010, 02:24 PM
jsayre914
Not to hijack... okay I did sorry...
Has anyone ... Oct 11 2010, 02:41 PM
kphimself On a Truck i restored a few years ago i was having... Oct 11 2010, 03:48 PM
jsayre914 I am jumping into phase 2. Overkill :evilgrin: It... Oct 13 2010, 04:08 PM
Vacca Rabite FANTASTIC! :trophy:
Zach Oct 13 2010, 04:35 PM
jsayre914 I put the interior back togeather last night. Man,... Oct 27 2010, 04:05 PM
jsayre914 The carpet is from 914 apperance and performnance.... Oct 27 2010, 04:07 PM
abayer1969 :drooley: Oct 27 2010, 04:13 PM
windforfun First class. Right on. Superb. Oct 27 2010, 05:27 PM
Vacca Rabite NICE! Oct 27 2010, 06:13 PM
Gint Nice work! That really looks good. I can... Oct 27 2010, 09:49 PM
geniusanthony First the praise. You did a very clean job of it a... Oct 28 2010, 03:27 AM
jsayre914 Its not Done yet,
I did drive it today, but i sti... Oct 28 2010, 10:21 AM
Vacca Rabite Joe, I'd like to measure the sound levels in m... Oct 28 2010, 10:49 AM
silver74insocal Looks awesome great job dude. how did the carpet g... Oct 29 2010, 04:14 PM
jsayre914
Looks awesome great job dude. how did the carpet ... Oct 29 2010, 05:29 PM
Jeffs9146 Second Skin Audio Products Nov 1 2011, 12:01 PM
sean_v8_914 I have done many inner fire walls with dyna mat or... Sep 29 2010, 07:16 AM sean_v8_914 alot of new metal under this one.
since I coated a... Sep 29 2010, 07:23 AM sean_v8_914 two layers or one layer of rattle trap extreme Sep 29 2010, 07:27 AM sean_v8_914 very important to seal the rear window very well. ... Sep 29 2010, 07:29 AM sean_v8_914 WARNING!!! POR 15 DOES NOT STICK WELL ... Sep 29 2010, 07:30 AM Vacca Rabite the metal got well etched from the wire wheeling.
... Sep 29 2010, 07:59 AM scotty b Sean is referring to a CHEMICAL etching that is re... Sep 29 2010, 08:05 AM Vacca Rabite Isn't Metal Ready an etching product? its one... Sep 29 2010, 09:00 AM strawman
Isn't Metal Ready an etching product? its on... Sep 29 2010, 09:20 AM mikea100 I used Prep & Etch. It is cheaper and readily ... Sep 29 2010, 10:11 AM scotty b Yes metal ready is proper, from what you stated it... Sep 29 2010, 10:26 AM jsayre914 any tips or tricks on installing the sound mat. I ... Sep 29 2010, 04:32 PM sean_v8_914 I am not familiar with the sound deadening you are... Sep 29 2010, 10:01 PM jsayre914 the stuff i used said to keep all surfaces wet for... Sep 29 2010, 10:07 PM jsayre914 Some work on the project yesterday :D Oct 10 2010, 03:29 PM jsayre914 and one picture for scotty. See, i do listen to yo... Oct 10 2010, 03:31 PM gothspeed
and one picture for scotty. See, i do listen to y... Nov 1 2011, 11:55 AM SirAndy I've been thinking about using a different app... Oct 10 2010, 05:48 PM Prospectfarms
I've been thinking about using a different ap... Nov 1 2011, 08:19 AM scotty b You could have saved yourself so much time, aggrav... Oct 10 2010, 05:54 PM tdgray Not to hijack... okay I did sorry...
Has anyone u... Oct 11 2010, 02:24 PM jsayre914
Not to hijack... okay I did sorry...
Has anyone ... Oct 11 2010, 02:41 PM kphimself On a Truck i restored a few years ago i was having... Oct 11 2010, 03:48 PM jsayre914 I am jumping into phase 2. Overkill :evilgrin: It... Oct 13 2010, 04:08 PM Vacca Rabite FANTASTIC! :trophy:
Zach Oct 13 2010, 04:35 PM jsayre914 I put the interior back togeather last night. Man,... Oct 27 2010, 04:05 PM jsayre914 The carpet is from 914 apperance and performnance.... Oct 27 2010, 04:07 PM abayer1969 :drooley: Oct 27 2010, 04:13 PM windforfun First class. Right on. Superb. Oct 27 2010, 05:27 PM Vacca Rabite NICE! Oct 27 2010, 06:13 PM Gint Nice work! That really looks good. I can... Oct 27 2010, 09:49 PM geniusanthony First the praise. You did a very clean job of it a... Oct 28 2010, 03:27 AM jsayre914 Its not Done yet,
I did drive it today, but i sti... Oct 28 2010, 10:21 AM Vacca Rabite Joe, I'd like to measure the sound levels in m... Oct 28 2010, 10:49 AM silver74insocal Looks awesome great job dude. how did the carpet g... Oct 29 2010, 04:14 PM jsayre914
Looks awesome great job dude. how did the carpet ... Oct 29 2010, 05:29 PM Jeffs9146 Second Skin Audio Products Nov 1 2011, 12:01 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 12:24 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.
| All rights reserved 914World.com © since 2002 |
|
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |